Troubleshooting
Document 900.0856 Rev B 141
02/08
F
Troubleshooting
Table F-1 Troubleshooting
Problem Possible Solution
No Power • Check power cord connections.
• Confirm that there is power at the outlet.
No Live Video • Check camera video cable and connections.
• Check monitor video cable and connections.
• Confirm that the camera has power.
• Check camera lens settings.
Live Video very bright If a cable is attached to the Loop connector, make certain it is
connected to a properly terminated device.
DVR has stopped recording If the hard disk drive is full, you will either need to delete video or set
the DVR to Recycle Mode.
The icon displays,
however, the DVR is not
recording
When the DVR is in the Pre-Event recording mode, the yellow and
display when there is no event, and the DVR is not recording. The
red and display when any event occurs and the DVR starts
recording.