Insignia 20ED310NA15 Flat Panel Television User Manual


 
13
Insignia 20" LED TV/DVD Combo
www.insigniaproducts.com
Connect a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the
best connection type available. For more information, see “What connection should I use?” on page 12.
HDMI (best)
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side or back of your TV and to the HDMI
OUT jack on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to highlight HDMI 1 or HDMI 2, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
You can also press HDMI to select the cable or satellite box.
HDMI cable
Cable or
satellite box
Side of TV
HDMI cable
connector
HDMI jack
On your TV