Insignia 20ED310NA15 Flat Panel Television User Manual


 
21
Insignia 20" LED TV/DVD Combo
www.insigniaproducts.com
AV (composite video) (good)
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the VIDEO/Y jack and L and R AUDIO jacks on the side of your TV and to
the AV OUT jacks on the DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S
or
T
to select Component/AV, then press ENTER.
Notes
Cables are often color-coded to match color-coded jacks.
The yellow video connector on the AV cable connects to the green
VIDEO/Y jack.
Notes
•The VIDEO/Y, P
B
, and P
R
video jacks (used to connect a component
device) share the L and R AUDIO jacks with the VIDEO/Y jack (used to
connect an AV (composite video) device).
When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
AV cable
(composite video cable)
Side of TV
AV
(composite
video) video
cable
connector
AV
(composite
video)
video jack
Audio cable
connectors
Analog
audio jacks
DVD or Blu-ray player
On your TV