Filter
Top Products
10
NS-DVDR1 DVD Recorder
www.insignia-products.com
To connect a two channel digital stereo or A/V
receiver with multi-channel decoder:
1 Connect one of the recorder’s DIGITAL
AUDIO OUT jacks (optical or coaxial) to the
corresponding in jack on your amplifier. Use
an optional digital (optical or coaxial) audio
cable.
2 Activate the recorder’s digital output. (See
“Audio Settings” on page 14).
Digital multi-channel sound
A digital multi-channel connection provides the
best sound quality. For this you need a
multi-channel audio/video receiver that supports
one or more of the audio formats supported by
your recorder, including MPEG 2, Dolby Digital
and DTS. Check the receiver manual and the
logos on the front of the receiver to verify this.
Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol are trademarks
of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
Accessory audio/video (A/V) connections
To connect the recorder to an accessory
component:
• Connect the AV IN 1 or AV 2 IN jacks on the
recorder to the audio/video out jacks on your
accessory component, such as a VCR or
camcorder, using the optional audio/video
cables. (Refer to “Recording from external
components” on page 22.)
Connecting a digital camcorder
• Use a DV cable (not supplied) to connect the
DV in/out jack of your DV digital camcorder to
the front panel DV IN jack of your recorder.
Note
• Due to the DTS Licensing agreement,
the digital output will be in DTS digital
out when DTS audio stream is
selected.
• If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a
strong, distorted sound or no sound at
all.
• To play six-channel digital surround
sound though a digital connection,
your receiver must have a Digital
Multi-channel decoder.
• To see the audio format of the current
DVD displayed on the screen, press
AUDIO.
• Your recorder does not perform
internal (2-channel) decoding of a DTS
sound track. To enjoy DTS
multi-channel surround, you must
connect your recorder to a DTS
compatible receiver through one of
your recorder’s digital audio outputs.
or
or
Jack panel of component
Note
If you use the S-VIDEO jack on the front
panel, the VIDEO IN jack on the front panel
is not available.
Note
This jack is for connection to DV equipment
only. It is not compatible with digital satellite
tuners or D-VHS video decks.
Front of recorder
DV digital camcorder