Filter
Top Products
45
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
www.insigniaproducts.com
2 Press or to select System, then press ENTER. The System menu
opens.
3 Press or to select Auto Power Down, then press ENTER.
4 Press or to select 5 Minutes, 10 Minutes, 20 Minutes, or 30
Minutes, then press ENTER.
5 Press to go to the previous menu.
Enabling InLink
This option is used to allow the TV remote control to control certain
functions of the Blu-ray player; and for the Blu-ray player to control certain
functions of the TV. InLink control is only available when you are using an
HDMI connection to your TV.
To enable InLink:
1 Press or to select Settings, then press ENTER. The Settings menu
opens.
2 Press or to select System, then press ENTER. The System menu
opens.
3 Press or to select InLink, then press ENTER.
4 Press or to select On (to allow mutual control of devices through
HDMI), then press ENTER.
5 Review the User Guide for your TV for CEC setup information.
6 Press to go to the previous menu.
Note
Not all TVs are compatible with your Blu-ray player.
NS-BRDVD4-BRDVD4-CA_10-0864_MAN_V6.fm Page 45 Monday, October 24, 2011 5:16 PM