Filter
Top Products
55
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
www.insigniaproducts.com
Resetting your player
To reset your player:
• To reset all settings (include parental control settings) to the factory
default, select one of the following options in the System menu:
• Restore factory settings and deactivate all connected
applications
• Restore factory settings
• Deactivate all connected applications
• Deactivate Netflix
• Deactivate Pandora
• Deactivate CinameNow
Power
Operation
Problem Solution
No power
Make sure that the power cord is plugged into a power outlet and that
the outlet is supplying power.
The player switches to standby mode
After a period of inactivity, your player switches to standby mode
automatically. This is a power saving feature.
If your player switches to standby mode unexpectedly, a safety device
may have been activated. Press STANDBY/ON on the front of your
player.
Problem Solution
Remote control does not work
• Make sure that you are pointing the remote control at the remote
control sensor on the front of your player.
• Make sure that there are no obstructions between the remote
control and the remote control sensor on the front of your player.
• Make sure that there is no colored glass between the remote
control and the remote control sensor on the front of your player.
Colored glass, such as the glass door of an entertainment center,
can interfere with signal reception.
• Make sure that the remote control sensor is not exposed to direct
sunlight or bright light. These can interfere with signal reception.
• Replace the batteries.
Some or all functions do not work
• Some functions are not allowed by the disc, for example,
fast-forwarding through the warning information at the
beginning of the disc.
• Condensation may have formed inside your player. Turn off your
player and wait one to two hours for the condensation to
evaporate.
• Reset your player. For instructions, see “Resetting your player” on
page 55.
NS-BRDVD4-BRDVD4-CA_10-0864_MAN_V6.fm Page 55 Monday, October 24, 2011 5:16 PM