Insignia S-BRDVD4-CA Blu-ray Player User Manual


 
57
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
www.insigniaproducts.com
TV screen and video
HDMI connections
Problem Solution
Video does not appear on the TV
screen or the picture is distorted
Make sure that the TV is connected to the correct jacks on the
back of your player.
Make sure that the TV is set to the correct video input source.
The TV may be in screen saver mode. Check the documentation
that came with the TV for instructions about “waking” your TV.
Reset your player. For instructions, see “Resetting your player” on
page 55.
Video is not output in high definition
High definition video cannot be output through the VIDEO jack.
You must connect the TV to your player using the COMPONENT
jacks or HDMI jack.
Make sure that the correct HDMI or component video resolution
has been selected in the Setup menu. See “Selecting the video
output resolution” on page 31.
Depending on the Blu-ray Disc, output from the COMPONENT
VIDEO jacks may be restricted to 480p.
The 4:3 aspect ratio picture expands
left and right or the picture size is
incorrect
Use the TV to change the aspect ratio. See the documentation
that came with the TV.
When using a component video cable, set TV Aspect on the
player to 4:3 Pan & Scan. See “Selecting the TV aspect ratio” on
page 32.
There is no apparent change in the
picture quality when the picture
settings are changed in the Setup
menu
Depending on the video type, changes may not be apparent.
When playing a BD-Live disc, the
screen is black
Erase BD Storage. See “Erasing BD-Live storage” on page 48.
Make sure that your Internet connection is working.
Make sure that the Internet cable is connected securely and
correctly to your player and the Internet jack. Some discs require
an Internet connection to play.
Problem Solution
The 4:3 aspect ratio picture expands
left and right or the picture size is
incorrect
Change TV Aspect on the player to 16:9. See “Selecting the TV
aspect ratio” on page 32.
NS-BRDVD4-BRDVD4-CA_10-0864_MAN_V6.fm Page 57 Monday, October 24, 2011 5:16 PM