Filter
Top Products
52
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
www.insigniaproducts.com
Updating the player firmware with the disc or USB stick
Once you have created an update CD or USB stick as described in the
section, perform the following steps to update the player’s software.
To upgrade the player firmware with a disc or USB stick:
1 Eject any discs that may be in the player and remove any USB sticks
already inserted in the player.
2 Turn the player off. If using an upgrade USB stick, insert the USB
memory stick into the player’s USB slot.
3 Turn the player back on. If you are using an upgrade disc, open the tray
and insert the update disc.
4 After a short period of time, a screen similar to the one below appears.
5 Press ENTER. The software update begins. During the software
update, a timer counts down the approximate number of minutes and
seconds remaining for the update.
6 Once the update is complete, a screen appears. If you used a CD for the
update, eject the update disc, and then throw it away. If you used an
update USB memory stick, power down the player, and then erase any
update .iso files placed on the USB memory stick before using it again.
Maintaining
General guidelines
• The top and back panels of your player may become hot after a long
period of use. This is not a malfunction.
• When your are not using your player, make sure that you remove the disc
and put your player into standby mode.
• If you do not use your player for a long period of time, it may not function
correctly. Turn on and use your player occasionally.
• Do not place objects on the disc tray.
• Do not locate your player:
• Near heating devices or in an enclosed vehicle
• In an area with a temperature over 104°F (40°C) or humidity
over 90%
Ok
Cancel
Below, select OK to proceed with the update or Cancel to abort, then press the Enter key
Player model INSIGNIA NS-WBRDVD2 BD Player
Player current version: PKG_085
Update version: PKG_90
INSIGNIA NS-BRDVD4 BD PLAYER
NS-BRDVD4-BRDVD4-CA_10-0864_MAN_V6.fm Page 52 Monday, October 24, 2011 5:16 PM