Filter
Top Products
8
Installing System Software
Recent releases of operating systems from major vendors include
setup programs, which load automatically and guide you through
hard disk preparation and operating system installation. The
guidelines below will help you determine the steps necessary to
install your operating system on the Micro PC hard drive.
NOTE: Some distributors and system integrators
may have already pre-installed system
software prior to shipment of your Micro PC.
Installing software requires an installed HDD. Software can be
loaded in the WBX-6200F-V using any of below methods:
1. Method 1: Use the Ethernet
You can use the Ethernet port to download software from the
Net to the HDD that has been pre-installed in WBX-6200F-V.
2. Method 2: Use the COM or Parallel Port
By connecting another PC to the WBX-6200F-V with an
appropriate cable, you can use transmission software to
transmit Operation System Software to the HDD that has been
pre-installed in the WBX-6200F-V.
3. Method 3: Use a External CD-ROM
You can use the external CD-ROM to transmit the software to
the HDD that has been pre-installed in the WBX-6200F-V.