Filter
Top Products
34
◎ Parallel Port IRQ :
This option is only valid if the Onboard Parallel Port
option is not set to Disabled. This option sets the IRQ used
by the parallel port.
On Board IDE
This option specifies the onboard IDE controller channels that
will be used. The settings are Disabled, Primary, Secondary,
or Both.
On Board LAN
This option allows you to enable / disable the onboard LAN
controller.
On Board LAN P.M.E
This option allows you to enable / disable the onboard LAN
PME signal (for LAN wake-up) function.
On Board AC’97 Audio
This option allows you to enable / disable the onboard AC'97
Audio function.
Hardware Monitor Setup
This setup describes current system status detected from hardware
monitor controller. The status showed on screen will include:
z There are two on-board temperature sensors, TSENS1,
and TSENS2.
z Current System Temperature (Generally indicates the
inside temperature of chassis or surface temperature of
SBC)
z Current Fan Speed