Filter
Top Products
30
Minute choices: 00-59
Second choices: 00-59
PCI/Plug and Play Setup
This section describes configuring the PCI bus system. PCI
(Peripheral Component Interconnect) is a system which
allows I/O devices to operate at speeds nearing CPU’s when
they communicate with own special components.
All of options described in this section are important and
technical and it is strongly recommended that only
experienced users could make any changes to the default
settings.
Plug and Play Aware O/S
Set this option to “Yes” if the operating system installed in the
computer is Plug and Play-aware. BIOS only detects and
enables PnP ISA adapter cards that are required for system
boot. The Windows 95 operating system detects and enables
all other PnP-aware adapter cards. Windows 95 is PnP-aware.
Set this option to “No” if the operating system (such as DOS,
OS/2, Windows 3.x) does not use PnP. You must set this
option correctly or PnP-aware adapter cards installed in your
computer will not be configured properly.
Clear NVRAM
This option is used to clear NVRAM and check or update ESCD
(Extended System Configuration Data) data after system
power on. Set this option to No that will not clear NVRAM and
the operation of update ESCD is effective in different ESCD