Filter
Top Products
ENGLISH - 23 -
Connect a decoder without an aerial
socket to the TV
Connect the decoder to the TV with a
eurocable to Scart 1.
TV And Video Recorder
Connect the aerial cables.
Better picture quality can be obtained if you
also connect a eurocable to SCART sockets.
Playback NTSC
To use this option you can;
Connect NTSC VCR player to Euroconnec-
tor at the rear side of the TV.
Connect NTSC VCR player to RCA Jacks at
the right side of the TV.
Then, press AV button to select proper
source.
Copy Facility
Source selection for VCR recording.
Select options menu.
Select scart 2 out source pressing
/
button.
Select Scart 1 to copy the picture from tuner.
Select Scart 2 to copy the picture from Tuner,
FAV or Scart 1.
Search For And Store The Test
Signal Of The Video Recorder
Unplug the aerial cable from the aerial socket
ANT of your video recorder.
Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
Enter the tv tuner menu in settings menu.
Enter the programming menu in tv tuner
menu and select manual search.
Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. See program-
ming menu. Store the test signal under
programme number 0.
Replace the aerial cable in the aerial socket
ANT of your video recorder once you have
stored the test signal.
Camera And Camcorder to
Connect to FAV Input
Connect your camera or camcorder FAV input
at the right side of the TV.
Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You should connect the jacks to the
input in the same color.
To Connect to SVideo Input
Connect your camera or camcorder SVideo
input at the right side of the TV.
Connect your equipment to the TV via SVideo
input and audio inputs of FAV inputs by using
SVideo cables.
Connect The Decoder To The
Video Recorder
Some video recorders have a special euro-
connector for decoder.
Connect a eurocable to the euroconnector of
your decoder and to the special eurocon-
nector of your video recorder. See also the
booklet of your video recorder.
To connect your video recorder to the TV, see
TV and Video Recorder section.
If you want to connect more equipment to your
TV, consult your dealer.
Connecting Headphones
Use the stereo headphone socket at the right
side of the TV, to connect headphones.
You can adjust the headphones volume and
sound mode from the audio menu. See page
14 for details.
01-ENG-3008W-17MB11-1860UK-(LT-30E45SJ)-50059704.p65 13.12.2004, 15:4423