Filter
Top Products
ENGLISH - 18 -
The first letter of the selected name is high-
lighted. To change that letter
/ button
can be used, and to select the other letters,
/ button can be used. If the cursor is
at the last letter of the Programme Name,
pressing
button moves the cursor at the
beginning. On the contrary, if the cursor is at
the beginning of the Programme Name,
pressing
button moves the cursor at the
end.
country
By pressing
/ button, select country.
"right/left to change country" is seen on the
screen. By pressing
/ button, you
should select the country where you are.
autoset
By pressing
/ button, select autoset.
"right/left to start aps function" is seen on
the screen. When
/ or OK button is
pressed, the following menu comes to the
screen. If you want to cancel autoset function,
press MENU button. You return to aps menu.
If you press MENU button after autoset is
started, program table appears on the screen.
0(18! 2.!
If OK button is pressed, autoset function starts
and the following menu comes to the screen.
After autoset is finalized, the program table
comes to the screen.In the programme table
you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and / or the
programme names of programmes, you can
change them in aps submenu in the settings
menu. (See page 17 for Program table expla-
nation.)
source select
By pressing / button, select source
select in settings menu. "<ok> to activate
source selection menu" is seen on the
screen. By pressing
/ or OK button,
you can enter the source select menu.
In source select menu, come on one of the
sources by pressing
/ button and
select it by pressing button. The source
types are Tuner, Scart 1, Scart 1 RGB,
Scart 2, Scart 2 RGB, PC, FAV and S-Video.
Other Features
TV Status
Programme Number, Programme Name
and Sound Indicator are displayed on the up-
per right side of the screen. Source is also
displayed with them on the right bottom side
of the screen. They are displayed after
programme change during 3 seconds or
when button is pressed.
Programme Number
35
Programme Name (5 characters)
These OSDs are displayed when a new pro-
gramme is entered by digit button, by press-
ing
or button or BACK but-
ton.
Pressing button when PC mode se-
lected shows sound indicator and the resolu-
tion of the screen.
When
button is pressed twice the cur-
01-ENG-3008W-17MB11-1860UK-(LT-30E45SU)-50059494.p65 07.12.2004, 10:4218