Filter
Top Products
PICTURE FEATURES
ENGLISH
17
AV32/28Z10EU / LCT0918-001A-U / English
!
!!
!
COLOUR SYSTEM
The colour system is chosen automatically. However, if the
picture is not clear or no colour appears, choose the colour
system manually.
1
Press the
6
buttons to choose
COLOUR SYSTEM. Then press the
a
button.
The Sub-menu of the COLOUR SYSTEM function
appears.
2
Press the
5
buttons to choose the
appropriate colour system.
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input
signal. Only when you are viewing a picture from
Programme number PR 0 (AV), or EXT terminal, you
can choose using the AUTO function.
3
Press the
a
button to complete the
setting.
The menu disappears.
Note:
• The AUTO function may not function properly if you
have poor signal quality. If the picture is abnormal
in the AUTO function, choose another colour
system manually.
• When in the Programme numbers PR 0 (AV) to PR
99, you cannot choose NTSC 3.58 or NTSC 4.43.
!
!!
!
4:3 AUTO ASPECT
You can choose one of three ZOOM modes, REGULAR,
PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the
normal picture (4:3 aspect ratio).
1
Press the
6
buttons to choose 4:3
AUTO ASPECT. Then press the
a
button.
The Sub-menu of the 4:3 AUTO ASPECT function
appears.
2
Press the
6
buttons to choose a ZOOM
mode.
3
Press the
a
button to complete the
settings.
The menu disappears.
!
!!
!
PICTURE TILT
There are cases where the Earth’s magnetic force may make
the picture tilt. If this happens, you can correct the picture tilt.
1
Press the
6
buttons to choose
PICTURE TILT. Then press the
a
button.
The Sub-menu of the PICTURE TILT function appears.
2
Press the
6
buttons until the picture
becomes level.
3
Press the
a
button to complete the
setting.
The menu disappears.
AV32Z10EU_Eng.book Page 17 Monday, June 4, 2001 6:12 PM