Filter
Top Products
25
ENGLISH
AV32/28Z10EU / LCT0918-001A-U / English
FEATURES
To display the FEATURES menu:
1
Press the
a
button to display MENU
(main menu).
2
Press the
6
button to choose
FEATURES. Then press the
a
button.
!
!!
!
SLEEP TIMER
You can set the TV to automatically turn off after a specified
period of time.
1
Press the
6
buttons to choose SLEEP
TIMER. Then press the
a
button.
A Sub-menu of the SLEEP TIMER function appears.
2
Press the
5
buttons to set the period
of time.
You can set the period of time a maximum of 120
minutes (2 hours) in 10 minute increments.
To cancel the SLEEP TIMER function:
Press the
2
button to set a period of time to “OFF.”
3
Press the
a
button to complete the
settings.
The menu disappears.
Note:
• One minute before the SLEEP TIMER function
turns off the TV, “GOOD NIGHT!” appears.
• The SLEEP TIMER function cannot be used to turn
off the TV’s main power.
• When the SLEEP TIMER function is on, you can
display the Sub-menu of the SLEEP TIMER
function again to confirm and/or change the
remaining period of time of the SLEEP TIMER
function. Press the
a
button to exit the menu after
confirming and / or changing the remaining time.
!
!!
!
BLUE BACK
You can set the TV to automatically change to a blue screen
and mute the sound if the signal is weak or absent, or when
there is no input from an external device.
1
Press the
6
buttons to choose BLUE
BACK.
2
Press the
5
buttons to choose ON.
To cancel the BLUE BACK function:
Press the
5
buttons to choose OFF.
3
Press the
a
button to complete the
setting.
The menu disappears.
!
!!
!
CHILD LOCK
When there is a TV channel you wish your children not to
watch, you can use the CHILD LOCK function to lock out the
TV channel. Even when a child chooses a Programme
number (PR) in which a locked TV channel has been
registered, the screen will change to blue and displays
n
(CHILD LOCK) so the TV channel cannot be viewed. Unless
you enter a pre-set ID number by a special operation, the lock
cannot be released and the child cannot view the TV channel
programmes.
To set the CHILD LOCK function
1
Press the
6
buttons to choose CHILD
LOCK. Then press the
o
button.
“SET ID NO.” (ID number setting screen) appears.
2
Set the ID number to your liking.
1
Press the
6
buttons to choose a
number.
2
Press the
5
buttons to move the
cursor.
3
Press the
a
button.
The Sub-menu of CHILD LOCK appears.
AV32Z10EU_Eng.book Page 25 Monday, June 4, 2001 6:12 PM