Filter
Top Products
DIGITAL SURROUND
ENGLISH
21
AV32/28Z10EU / LCT0918-001A-U / English
!
!!
!
Other surround functions
DANCE CLUB:
This function creates a dance club atmosphere.
CONCERT HALL:
This function creates a concert hall atmosphere.
STADIUM:
This function creates a stadium atmosphere.
• The above function does not appear in the DIGITAL
SURROUND menu when viewing a programme from the
EXT terminal which has been set to DIGITAL-IN.
• The above function does not work properly for the Dolby
Surround encoded programmes or mono sound
programmes.
3D-PHONIC setting
1
Press the
6
buttons to choose 3D-
PHONIC. Then press the
3
button.
The sub-menu of the 3D-PHONIC function appears.
2
Press the
6
buttons to choose an item.
Then press the
5
buttons to change
the setting.
TV SPEAKER:
Only set to CENTRE when the front speakers are
connected to the TV. Otherwise set to L/C/R.
SUBWOOFER:
Set SUBWOOFER to ON when the subwoofer system
is connected to the TV. Otherwise, set to OFF.
LEVEL:
You can control the effect level of the 3D-PHONIC
function as you like.
VOLUME (LEFT/CENTRE/RIGHT):
You can adjust the sound level of each speaker
individually. LEFT/RIGHT denotes left and right of the
front speakers and CENTRE denotes the centre
speaker.
3
Press the OK button to complete the
setting.
The menu disappears.
Note:
• When a speaker system is not connected to the TV, set TV
SPEAKER to L/C/R and SUBWOOFER to OFF. Otherwise
the sound will not be emitted correctly.
• When you do not want to emit sound from the TV speakers,
set TV SPEAKER to OFF.
DOLBY DIGITAL setting
Correctly set the items in the sub-menu of the DOLBY
DIGITAL function, and use the test signal to control the
volume level of the speakers so that you can listen to the
sounds from them uniformly. Be sure to perform this
operation before using the DOLBY DIGITAL function.
1
Press the
6
buttons to choose DOLBY
DIGITAL. Then press the
3
button.
The sub-menu of the DOLBY DIGITAL function
appears.
2
Press the
6
buttons to choose an item.
Then press the
5
buttons to change
the setting.
TV SPEAKER:
Only set to CENTRE when the front speakers are
connected to the TV. Otherwise set to L/C/R.
REAR SPEAKER:
Set to ON when the rear speaker is connected to the
TV. Otherwise set to OFF. However, you cannot enjoy
surround sound when it is set to OFF.
SUBWOOFER:
Set SUBWOOFER to ON when the subwoofer system
is connected to the TV. Otherwise, set to OFF.
TEST MODE/VOLUME (LEFT/CENTRE/RIGHT/
LS/RS):
Set the volume balance of the speakers so that the
correct surround effect can be achieved.
When the other settings have been completed, adjust in
accordance with “Adjusting the volume balance with the
TEST MODE” on page 22.
AV32Z10EU_Eng.book Page 21 Monday, June 4, 2001 6:12 PM