Filter
Top Products
INSTALL
30
AV32/28Z10EU / LCT0918-001A-U / English
4
Press the blue button to display the ID
LIST (channel name list).
5
Press the
6
buttons to choose the
Channel name (ID).
To cancel the ID function:
Press the
h
(Information) button.
6
Press the
a
button to register a
Channel name (ID) to a TV channel.
Note:
• You can register your unique Channel name (ID) to
the TV channel. When step 3 is completed, do not
go to step 4, but press the
5
buttons to move the
cursor and the
6
buttons to choose a character
for completing the Channel name (ID). Then press
the
a
button to register the Channel name (ID) to
the TV channel.
INSERT
Preparation:
• A CH/CC number unique to this TV and corresponding to
the Channel number of a TV channel is required. Find the
corresponding CH/CC number from a table “CH/CC
NUMBER” on page 39 based on the Channel number of
the TV channel.
• When the COUNTRY setting is not FRANCE, use a two-
digit CH/CC number. When the COUNTRY setting is
FRANCE, use a three-digit CH/CC number.
• Only when you add a TV channel (SECAM-L system) from
a French station, be sure to set COUNTRY to FRANCE. If
the COUNTRY setting is not FRANCE, follow the
description “Changing the COUNTRY setting” on page 33
to change the COUNTRY setting to FRANCE, then start
the INSERT function.
1
Press the
6
buttons to choose a
Programme number (PR) for which you
will register a new TV channel.
2
Press the green button and start the
INSERT function.
3
Press the
6
buttons to choose “CC” or
“CH” according to the CH/CC number of
the TV channel.
When the COUNTRY setting is FRANCE:
Choose “CH1”, “CH2”, “CC1” or “CC2”.
To cancel the INSERT function:
Press the
h
(Information) button.
4
Press the Number buttons to enter the
remaining CH/CC number.
The TV shifts to registration mode.
When the registration is completed, the picture of the
TV channel appears on the screen.
Note:
• The CH/CC number is a number indicating the
broadcast frequency to the TV. If the TV cannot
detect the TV channel corresponding to the
broadcast frequency indicated by the CH/CC
number, a picture in the no-signal state appears.
AV32Z10EU_Eng.book Page 30 Monday, June 4, 2001 6:12 PM