Filter
Top Products
PREPARATION
4
AV32/28Z10EU / LCT0918-001A-U / English
5
Press the blue button to start the
AUTO PROGRAM function.
The AUTO PROGRAM menu appears and received TV
channels are automatically registered in the
Programme numbers (PR).
If “ACI START/ACI SKIP” appears in the AUTO
PROGRAM menu:
You can use the ACI (Automatic Channel Installation)
function to decode the ACI data and complete the
registration of all the TV channels in a short period of
time. For details of the ACI function and how to use it,
refer to “Using the ACI function” on page 33.
If you don’t want to use the ACI function, press the
6
button to choose ACI SKIP and then press
a
.
To cancel the AUTO PROGRAM function:
Press the
b
button.
6
After the TV channels have been
registered in the Programme
numbers (PR), the EDIT menu
appears.
You can proceed to edit the Programme numbers (PR)
using the EDIT/MANUAL function. For details, see
“EDIT/MANUAL” on page 28.
When not using the EDIT/MANUAL function:
If you do not need to use the EDIT/MANUAL function,
go to the next step.
7
Press the
a
button to display the
T-V LINK menu.
8
Operate the T-V LINK menu
according to the type of a VCR
connected to the EXT-2 terminal.
When a T-V LINK compatible VCR is not
connected:
Press the
b
button to exit the T-V LINK menu.
The T-V LINK menu disappears.
When a T-V LINK compatible VCR is
connected:
Follow the operating procedure “Downloading the data
to VCR” on page 33 to transmit the Programme number
(PR) data.
9
Now, the initial settings are
complete, and you can watch the
TV.
Note:
• When your TV can detect the TV channel name
from the TV channel broadcast signal, it
automatically registers the TV channel name (ID) to
the Programme number (PR) in which the TV
channel has been registered.
• If a TV channel you want to view is not set to a
Programme number (PR), manually set it using the
MANUAL function. For details, see “EDIT/
MANUAL” on page 28.
• The TV channel is not registered in Programme
number PR 0 (AV). When you want to register a TV
channel to PR 0 (AV), manually set it using the
MANUAL function. For details, see “EDIT/
MANUAL” on page 28.
AV32Z10EU_Eng.book Page 4 Monday, June 4, 2001 6:12 PM