Filter
Top Products
BASIC OPERATION
ENGLISH
7
AV32/28Z10EU / LCT0918-001A-U / English
2
Press the
5
and
6
buttons to
choose a Programme number (PR). Then
press the
a
button.
Note:
• For Programme numbers (PR) with the CHILD
LOCK function set, the
n
(CHILD LOCK) mark is
displayed next to the Programme number (PR) in
the PR LIST.
• You cannot use the
6
buttons to choose a
Programme number (PR) with the CHILD LOCK
funtion set.
• Even if you try to choose a Programme number
(PR) with the CHILD LOCK function set, the
n
(CHILD LOCK) mark will appear, and you cannot
watch the TV channel. To watch the TV channel,
see “CHILD LOCK” on page 25.
• If you do not have a clear picture or no colour
appears, change the colour system manually. See
“COLOUR SYSTEM” on page 17.
• If the picture is tilted, correct it. See “PICTURE
TILT” on page 17.
!
!!
!
Adjust the volume
Press the
5
buttons to adjust the volume.
The Volume indicator appears and the volume changes as
you press the
q
buttons.
To listen to the sound using headphones:
See “HEADPHONE” on page 19.
!
!!
!
Watch images from external
devices
Choose an EXT terminal to which the desired external device
has been connected.
Use the
o
button:
Press the
o
button to choose an EXT terminal.
Pressing the
o
button changes the choice as follows:
Use the
6
buttons:
Press the
6
buttons to choose an EXT terminal.
Use the PR LIST:
1
Press the
h
(Information) button to
display the PR LIST.
2
Press the
5
and
6
buttons to
choose an EXT terminal. Then press the
a
button
.
Note:
• The EXT terminals are registered after the
Programme number PR 99.
• You can choose a video input signal from the S-
VIDEO signal (Y/C signal) and regular video signal
(composite signal). For details, see “S-IN (S-VIDEO
input)” on page 23.
• When listening to Dolby Digital audio, see
“Listening to Dolby Digital audio” on page 36.
• If you do not have a clear picture or no colour
appears, change the colour system manually. See
“COLOUR SYSTEM” on page 17.
• When choosing an EXT terminal with no input
signal, the EXT terminal number becomes fixed on
the screen.
• This TV set has a function which can automatically
change over the input according to a special signal
output from an external device. (The EXT-4
terminal does not support it.)
To return to a TV channel:
Press the
b
button, the
6
buttons or the Number
buttons.
To use the Programme number PR 0 (AV):
When the TV and VCR are connected only by the Aerial
cable, choosing the Programme number PR 0 (AV)
allows you to view images from the VCR. Set the VCR
RF channel to the Programme number PR 0 (AV)
manually. For details, see “EDIT/MANUAL” on page 28.
Pressing the
o
button changes the choice as
follows:
Note:
• The VCR RF channel is sent as the RF signal from
the VCR.
• Also refer to your VCR instruction manual.
TV mode EXT modes
Programme
numbers
PR 1 – PR 99
TV mode
EXT modes
Programme
numbers
PR 1 – PR 99
AV32Z10EU_Eng.book Page 7 Monday, June 4, 2001 6:12 PM