Filter
Top Products
33
ENGLISH
AV32/28Z10EU / LCT0918-001A-U / English
ADDITIONAL MENU OPERATIONS
!
!!
!
Using the ACI function
This TV has an ACI function which decodes the ACI
(automatic Channel Installation) data.
Using the ACI function allows all TV channels transmitted
from the cable TV station to be properly registered quickly
according to the data from the cable TV station.
Caution:
• If your cable TV station broadcasts ACI data and if “ACI
START/ACI SKIP” appears in the AUTO PROGRAM
menu, the ACI function is enabled. In all other cases, it is
disabled.
1
Press the
6
button to choose ACI
START. Then press the
a
button to
start the ACI function.
When you don't want to use the ACI function:
Press the
6
button to choose ACI SKIP and then
press the
a
button.
If the AUTO PROGRAM menu changes to
another menu:
Depending on your cable TV station, there may be a
broadcast selection menu set up by the cable TV
station.
Follow the menu indications and use the
5
and
6
buttons to operate the menu. After you have made the
setting, press the
a
button.
If “ACI ERROR” is displayed in the AUTO
PROGRAM menu:
“ACI ERROR” denotes that the ACI function is not
working properly. Press the
a
button to start the ACI
function again.
If “ACI ERROR” still appears even after you have tried
to start the ACI function several times, press the
3
button to start the AUTO PROGRAM function. It does
not cause any problem because all the TV channels are
registered to the Programme numbers (PR) by the
AUTO PROGRAM function.
2
When the settings are completed, the
EDIT menu is displayed. Return to the
instructions that you were reading
before, and continue the operation.
When the “Initial Settings” has been made:
Return to step 6 of “Initial Settings” on page 4.
When the “AUTO PROGRAM” has been made:
Return to step 4 of “AUTO PROGRAM” on page 27.
Note:
• If you have any questions about the items in the
Broadcast Selection menu or how to operate the
menu, please contact your cable TV station.
• When the cable TV broadcast reception is poor, the
ACI function will not work properly.
• If there is an error in the ACI data itself, the TV
channel cannot be registered properly. If this
happens, turn the ACI function off (ACI SKIP) and
use the AUTO PROGRAM function. Alternatively,
use the EDIT/MANUAL function to correct the
Programme number (PR) setting.
!
!!
!
Downloading the data to VCR
You can transmit to the latest Programme numbers (PR) data
to the VCR with the T-V LINK function.
Caution:
• Only when the T-V LINK compatible VCR is connected to
the EXT-2 terminal, this operation is enabled.
• Only when the T-V LINK menu is being displayed, this
operation is enabled.
1
Turn on the VCR.
2
Press the
a
button.
The data transmission begins.
The T-V LINK menu disappears once the data
transmission ends.
When the T-V LINK menu is changed over to
another menu:
The menu operation at the TV side is completed and it
is shifted to the menu operation at the VCR side. Refer
to the VCR Instruction Manual and operate the VCR.
Note:
• If “FEATURE NOT AVAILABLE” appears at the T-V
LINK menu, ensure the following three items are
correct; then press the
a
button to retry data
transmission.
- Has the T-V LINK compatible VCR been
connected to the EXT-2 terminal?
- Has the VCR power been turned on?
- Does the SCART cable that is connected to the
EXT-2 terminal to T-V LINK compatible VCR
have all proper connections?
!
!!
!
Changing the COUNTRY
setting
After the AUTO PROGRAM function is completed, you can
change the country you have already set by using the AUTO
PROGRAM function.
When registering the TV channels for French broadcast
stations (SECAM-L system), perform this operation to change
the country.
1
Display the INSTALL menu.
When the EDIT menu is currently being
displayed:
Press the
h
(Information) to return to the INSTALL
menu.
AV32Z10EU_Eng.book Page 33 Monday, June 4, 2001 6:12 PM