Filter
Top Products
INSTALL
ENGLISH
31
AV32/28Z10EU / LCT0918-001A-U / English
DELETE
1
Press the
6
buttons to choose a TV
channel.
Every time you press the
6
buttons, the Programme
number (PR) is changed over, and the picture of the TV
channel registered in the Programme number (PR)
appears on the screen.
2
Press the yellow button to delete the TV
channel.
The TV channel is deleted from the Programme
numbers (PR) list.
MANUAL
Preparation:
• As long as you register the TV channel (SECAM-L system)
from a French station, be sure to set the COUNTRY setting
to FRANCE. If the COUNTRY setting is not FRANCE,
follow the description “Changing the COUNTRY setting” on
page 33 to change the COUNTRY setting to FRANCE,
then start the MANUAL function.
1
Press the
6
buttons to choose a
Programme number (PR) to which you
want to register a new TV channel.
2
Press the blue button to activate the
MANUAL function.
At the right side following the CH/CC number, the
SYSTEM (broadcasting system) of the TV channel
appears.
To cancel the MANUAL function:
Press the
h
(Information) button.
3
Press the
3
button to choose the
SYSTEM (broadcasting system) for a TV
channel you want to register.
TV channel (SECAM-L system) from a French
station:
Set the SYSTEM to “L”. If it is set to one other than “L”,
you cannot receive the TV channel of the SECAM-L
system.
Other TV channels:
If you do not know the correct broadcasting system, set
the SYSTEM to “B/G”. If “B/G” is not correct, it results in
the fact that you will not hear the sound normally when
the TV detects a TV channel. In this case, retry to set
the SYSTEM again correctly so that no problem arises.
4
Press the green or red button to search
for a TV channel.
Scanning stops when the TV finds a TV channel. Then
the TV channel is displayed.
5
Press the green or red button repeatedly
until the TV channel you want appears.
If the TV channel reception is poor:
Press the blue or yellow button to fine-tune the TV
channel.
If you cannot hear the normal sound even
when the picture of the TV channel appears
normally:
The SYSTEM setting is wrong. Press the
3
button and
choose a SYSTEM that has normal sound.
6
Press the
a
button and register the TV
channel to a Programme number (PR).
The normal EDIT menu is resumed.
AV32Z10EU_Eng.book Page 31 Monday, June 4, 2001 6:12 PM