JVC HR-S5400U VCR User Manual


 
EN 39
q
MENU
OK
CH
ACCESS MAIN MENU
SCREEN
1
Press MENU as many times as necessary.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5
or SHUTTLE PLUS%
, then press OK.
ACCESS S-VHS MODE
SCREEN
3
Move the highlight bar
(arrow) to "S-VHS MODE"
by pressing CH5
or
SHUTTLE PLUS%
, then
press OK.
SELECT MODE
4
Move the highlight bar
(arrow) to "AUTO" or
"OFF" by pressing CH
5
or SHUTTLE PLUS
%
.
RETURN TO NORMAL
SCREEN
5
Press MENU as many times as necessary.
FUNCTION
AUTO TIMER
SUPERIMPOSE
AUDIO SELECT
AUX INPUT
SPECIAL FUNCTION
TAPE DUB MODE
=S-VHS MODE
PRESS (5,), THEN (OK)
PRESS (MENU) TO END
S-VHS MODE
=AUTO
OFF
PRESS (5,) TO SELECT
PRESS (MENU) TO END
NOTE:
When playing back a tape that has been recorded in S-VHS, the
S-VHS indicator lights on the display panel regardless of the "S-
VHS MODE" setting.
3
78
CH
MENU
SHUTTLE PLUS
OK
S-VHS (Super VHS) and VHS
Your VCR can record in either S-VHS or VHS.
S-VHS allows you to make high quality video recordings with a
horizontal resolution of 400 lines. This compares with the 240
lines of resolution of normal VHS recordings. To achieve the
highest quality picture we recommend that you record in S-VHS
mode.
To record in S-VHS;
perform the steps 1 – 5 below to set the "S-VHS MODE" to
"AUTO".
then, insert a cassette marked "S-VHS", the S-VHS indicator
will light on the display panel.
The S-VHS recording mode will be automatically selected.
To record in VHS;
insert a cassette marked "VHS".
The VHS recording mode will be automatically selected
regardless of the S-VHS mode setting.
To record in VHS on an S-VHS cassette;
insert the cassette marked "S-VHS", the S-VHS indicator will
light on the display panel.
then, perform the steps 1 – 5 below to set the "S-VHS MODE"
to "OFF"; the S-VHS indicator will go out.
The VHS recording mode will be selected.
NOTE:
Tapes recorded in S-VHS mode can not be played back
successfully on normal VHS VCRs.