JVC HR-S5400U VCR User Manual


 
EN 7
NOTES:
Your S-VHS VCR allows you to make high resolution
recordings. For highest quality recordings we recommend that
you record in the S-VHS mode ( pg.39)
To make the most of the Super VHS picture performance we
recommend that you use the supplied S-VIDEO cable to
connect your VCR to a TV with an S-VIDEO input connector.
To operate the VCR with your TV using the S-VIDEO connec-
tion, set your TV to the AV mode using the TV's remote
control.
You can also use the TV/VCR button on the VCR's remote
control to set your TV to the AV mode. (
pg. 56)
S-VIDEO Connection
CONNECT VCR TO TV
a– Connect both the RF cable and the AV cables to the TV as
explained in step 3 of "Basic Connections" ( pg. 6).
b– Connect the S-Video cable between the S-VIDEO OUT
jack on the rear of the VCR and the S-VIDEO IN jack on
the TV.
Antenna or Cable
AC Outlet
S-VIDEO IN
75 ohm terminal
ANTENNA-IN
(Antenna or Cable input)
AC Power Cord
Matching Transformer
(Not supplied)
S-VIDEO
OUT
TV OUT
RF Cable
(supplied)
S-Video Cable
(supplied)
Coaxial Cable
Flat Feeder
Audio/Video
Cable (supplied)
TV
Back of VCR