Filter
Top Products
EN 51
ACCESS TAPE DUB MODE
SCREEN
12
Press CH
5
∞ or SHUTTLE PLUS
%
fi to move the
highlight bar (arrow) to “TAPE DUB MODE”, then press
OK.
SELECT MODE
13
Move the highlight bar
(arrow) to "ON" by
pressing CH
5
∞ or
SHUTTLE PLUS
%
fi.
● "TAPE DUB MODE"
should be set to "ON" to
minimize picture
degradation while editing.
RETURN TO NORMAL
SCREEN
14
Press MENU as many times as necessary.
START PLAYER
15
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
16
Set your VCR to its record mode.
● If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction manual.)
NOTES:
●
Be sure to set "TAPE DUB MODE" back to "OFF" when you
finish editing.
●
When "TAPE DUB MODE" is set to "ON" Active Video
Calibration is deactivated in order to provide better picture
quality edits.
●
If you use an auxiliary input to connect a cable box or DBS
receiver make sure that the correct input ("FRONT VIDEO",
"REAR S-VIDEO" or "REAR VIDEO") is selected after you have
finished editing (
੬
step 10).
q
RETURN TO FUNCTION
SET SCREEN
8
Press MENU.
ACCESS AUX INPUT
SCREEN
9
Press CH5
∞
or SHUTTLE PLUS%
fi
to move the
highlight bar (arrow) to “AUX INPUT”, then press OK.
SELECT INPUT
10
Press CH5
∞
or SHUTTLE
PLUS%
fi
to move the
highlight bar (arrow) to
your choice.
a– FRONT VIDEO: To use
the VCR's front VIDEO
and/or AUDIO IN
connectors.
b– REAR S-VIDEO: To use
the VCR's rear S-VIDEO (S-VHS) and/or rear AUDIO
IN connectors.
c– REAR VIDEO: To use the VCR's rear VIDEO and/or
AUDIO IN connectors.
RETURN TO FUNCTION
SET SCREEN
11
Press MENU.
AUX INPUT
FRONT VIDEO
REAR S-VIDEO
=REAR VIDEO
PRESS (5,∞), TO SELECT
PRESS (MENU) TO END
TAPE DUB MODE
=ON
OFF
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
MENU
OK
CH
7
8
0
9
3
¶
4¢
78
1¡
CH
MENU
SHUTTLE PLUS
OK