JVC HR-S5400U VCR User Manual


 
42 EN
VCR Plus+
Timer
Programming
Before VCR Plus+ Timer programming, see "VCR Plus+
Setup" on page 20.
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
Timer recording allows you to program the VCR to automati-
cally record a program which will be broadcast at some future
time.
The timer record function can be programmed using VCR Plus+
or On-Screen Timer Programming. ( pg. 42 or 44)
TIMER RECORDING
VCR PLUS+
PRESS NUMBER KEY (0-9)
PRESS (MENU) TO MAIN MENU
LOAD A CASSETTE
1
Make sure the record safety tab is present.
The VCR’s power comes on automatically.
ACCESS VCR PLUS+ SCREEN
2
Press MENU on the remote
control.
The clock must be set in
order to access the VCR
Plus+ screen. If you
haven’t set the clock, the
Main Menu screen
appears when you press
MENU. Refer to page 8
for the Plug & Play procedure or page 11 for the clock
setting procedure.
ENTER PLUSCODE NUMBER
3
Press the appropriate NUMBER keys to enter the
PlusCode number printed in the TV listings for the TV
program you wish to record.
To make corrections, press CANCEL and input the
correct PlusCode number.
If the PlusCode number you input is incorrect,
"ERROR" may appear on the screen to advise you of
the error. This happens when the PlusCode number is
for a program which has already passed. "ERROR" is
displayed for about 4 seconds and the VCR Plus+
screen reappears (step 2).
CHECK INPUT DATA
4
Press OK and the Program
screen appears.
The PlusCode number you
entered and the matching
Timer-Recording informa-
tion is displayed on the
Program screen. Check to
make sure it’s accurate.
To timer-record daily or
weekly serials, press DAILY (NUMBER “8”) or
WEEKLY (NUMBER “9”). “DAILY” or “WEEKLY”
appears on the Program screen. Pressing the button
again makes each corresponding display disappear.
If you made a mistake, press CANCEL and, after
pressing MENU as many times as necessary to access
the VCR Plus+ screen, input the correct PlusCode
number.
SET TAPE SPEED
5
Press SP/EP.
PROGRAM 1
(VCR PLUS+ 12345678)
DATE 12/24 WED
START 12:00 PM
STOP 1:00 PM
CHANNEL 40 SP
PRESS (8=DAILY, 9=WEEKLY
SP/EP=REC SPEED)
PRESS (MENU) TO END
q
1
2
3
456
7
8
0
9
3
78
MENU
CANCEL
NUMBER
NUMBER "9"
NUMBER "8"
SP/EP
OK