Filter
Top Products
EN 45
MAKE CORRECTIONS
6
To change any of the settings, press OK or SHUTTLE
PLUS until the item you want to change begins
blinking. Then set as in step 5.
RETURN TO NORMAL
SCREEN
7
Press MENU as many times as necessary.
● Press just once to access the Auto Timer screen
(੬ pg. 47).
ENGAGE TIMER MODE
8
Press TIMER. The VCR turns off automatically.
NOTES:
●
To disengage the timer before recording starts, press TIMER
again. Pressing once more re-engages it.
●
In case of a power failure after programming, the VCR’s memory
backup keeps your selections for approximately 10 minutes.
●
If you select "PROGRAM SET" without having set the date and
time, an error message appears. Follow its instructions.
●
If you enter a start time that has already passed, "ERROR"
appears on the screen and blinks.
●
Programs that start after midnight must have the next day’s date.
●
After timer recording is completed, the VCR’s power goes off
automatically.
●
You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.
●
If the end of tape is reached during timer recording, the
cassette is automatically ejected.
●
When timer-recording cable or satellite channels through an
external tuner, be sure to keep the cable box or satellite
receiver's power ON.
EXAMPLE
If you program the VCR to timer
record a show on December 24
on channel 40 from 12:00 noon
to 1:00 PM in SP mode, the
screen will look like this:
PROGRAM 1
DATE 12/24 WED
START 12:00 PM
STOP 1:00 PM
CHANNEL 40 SP
PRESS NUMBER KEY (O–9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
ATTENTION FOR DBS RECEIVER USERS
If you are using a DBS receiver
(unless "DBS RECEIVER OUT-
PUT" is set to "OFF" ੬ pg.23),
the BAND indication (TV or
CATV or DBS) appears to the
right of the channel number dis-
play. If the channel number that
has been entered requires that
the band be set, the BAND in-
dication starts blinking:
a- TV : To timer-record a regular TV program received
on the VCR.
b- CATV : To timer-record a cable TV program received on
the VCR, or through a cable box (unless
"CABLE BOX OUTPUT" is set to "OFF" ੬ pg.18).
c- DBS : To timer-record a satellite program received
through a DBS receiver.
Press CH5∞ or SHUTTLE PLUS%
fi
to select the appropri-
ate band, then press OK.
● If "BAND" is set to "TV" at the Band screen (
੬ pg.15),
CATV will not be displayed on the Program screen; if it is
set to "CATV", TV will not be displayed.
PROGRAM 1
DATE 12/24 WED
START 12:00 PM
STOP 1:00 PM
CHANNEL 110 DBS SP
PRESS NUMBER KEY (O–9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
fi
fi