Filter
Top Products
8 EN
INITIAL SETTINGS
Plug & Play
The Plug & Play function sets the clock and tuner channels
automatically when power is first connected to the VCR. The
antenna cable must be connected for the Plug & Play function.
The time and date can be set automatically from clock setting
data that is transmitted by one of the regular TV broadcast
channels. We call this TV channel the “Host Channel” and it is
a PBS channel in your area.
Auto Clock Set/Auto Tuner Set
PLUG & PLAY SETUP
1
Connect the antenna cable to the VCR (੬ pg. 6). Then
connect the VCR’s power plug to an AC outlet. Do not
power on the VCR. The clock and tuner channels will
be set automatically.
If you use a cable box, see "ATTENTION CABLE BOX
SUBSCRIBERS" on this page.
NOTES:
● Auto clock set is performed first. The auto clock set
function scans all the channels received by your VCR
to find the Host Channel and then sets the clock.
"Auto" blinks on the front display panel during Auto
clock set.
● Auto channel set is performed next. The auto channel
set function scans all the channels that are receivable
by your VCR. It then automatically assigns each
receivable channels to the CH▲▼ buttons. It skips
non-receivable channels. During auto channel set the
channel numbers are displayed as they are scanned
and set.
● When Plug & Play has been completed successfully the
correct time is displayed.
● If an incorrect time or "– –:– –" appears on the display
panel, see "What To Do If Plug & Play Has Failed" on
next page.
q
IMPORTANT
● Don’t press any buttons on the VCR or remote while
Plug & Play is in progress.
● If you perform Plug & Play successfully, there’s no need to
perform the Clock (੬ pg. 11) and Tuner (੬ pg. 14)
procedures. If, however, you want to add or delete
channels, refer to “Add Or Delete A Channel” on page 16.
PM
Plug & Play Completed
The current time (including
AM/PM) is displayed.
During Initial Auto Clock Set
"Auto" blinks.
During Auto Channel Set
The channel numbers are displayed
as they are scanned and set.
* If an incorrect time or "– –:– –" appears on the display panel, see "What To Do If Plug & Play Has Failed" on next page.
ATTENTION CABLE BOX SUBSCRIBERS
To perform the Plug & Play procedure . . .
● Connect your cable box to your VCR with the RF cable.
● Select the PBS channel on your cable box before plugging your VCR's power plug into the AC outlet.( If Plug & Play is not
successful you may have to select an alternative PBS channel if another is available in your area.)
● If there is no PBS channel in your area, or if Plug & Play is not successful, perform the Manual Clock Set procedure (੬ pg.
13).
● For automatic clock adjustment to take place the VCR's power must be off and the cable box must be set to the PBS channel
at clock adjustment times.
● If you perform Plug & Play successfully, D.S.T. will be set to “AUTO”. At the D.S.T. adjustment time (੬ pg. 13), your VCR's
power must be off and your cable box must be set to the host PBS channel in your area for the D.S.T. adjustment to take place.
If the clock is not set correctly, change the D.S.T. setting to “ON” or “OFF. See step 9 of Semi-Auto procedure (੬ pg. 13) or
step 6 of Manual procedure (੬ pg. 13).