Filter
Top Products
EN 41
Hi-Fi Audio Recording Level
Control
Your VCR allows manual adjustment of the Hi-Fi audio
recording level. Normally the preset audio recording level is
satisfactory, but if the sound you are going to record is too loud
or too low, adjust the audio recording level while referring to
the VCR's audio level meters.
q
MENU
OK
CH
ACCESS MAIN MENU SCREEN
1
Press MENU as many times as necessary.
ACCESS FUNCTION SET SCREEN
2
Press CH
5
∞ or SHUTTLE PLUS
%
fi to move the
highlight bar (arrow) to “FUNCTION SET”, then press
OK.
ACCESS AUDIO SELECT SCREEN
3
Move the highlight bar (arrow) to "AUDIO SELECT" by
pressing CH5
∞
or SHUTTLE PLUS%
fi
, then press OK.
ACCESS HI-FI REC LEVEL SCREEN
4
Press CH
5
∞ or SHUTTLE PLUS
%
fi to move the
highlight bar (arrow) to “HI-FI REC LEVEL”, then press
OK.
SELECT MODE
5
Move the highlight bar
(arrow) to “MANUAL” by
pressing CH5
∞
or
SHUTTLE PLUS%
fi
.
ADJUST AUDIO RECORDING
LEVEL
6
Press FF or REW.
● Press FF or REW briefly 5 times to move the on-
screen's audio levels by one division on the scale. To
move the audio levels faster, keep FF or REW presssed.
● Adjust the recording level while watching the VCR's
audio level meters. Set the level so that maximum
volume causes the meters to vary between 0dB to 4dB.
RETURN TO NORMAL SCREEN
7
Press MENU as many times as necessary to exit.
NOTE:
Noise will increase if the recording level is too low, while
distortion will increase if the level is too high.
1
2
3
456
7
8
0
9
3
¶
4¢
78
1¡
REW
FF
CH
MENU
SHUTTLE PLUS
OK
HI-FI REC LEVEL CONTROL
PRESET
=MANUAL
PRESS PRESS
(REW) (FF)
MIN
+
*
MAX
PRESS (
5
, ∞) TO SELECT
PRESS (MENU) TO END