Filter
Top Products
EN 55
INFORMATION ON J TERMINAL
J Terminal (JLIP(Joint Level
Interface Protocol) Connector)
The J Terminal is used to connect the VCR to a personal
computer or similar device to allow computerized control of the
VCR during editing and certain other operations.
Example:
Allows you to capture still images from the recorder into a
personal computer with the optional JLIP VIDEO CAPTURE
BOX GV-CB1U.
For further details consult your nearest JVC dealer.
U.S. customers can contact JVC directly toll free at 1-800-252-
5722.
JLIP ID Number
Your VCR has its own JLIP ID number. This ID number must be
unique when your VCR is connected to another device via its J
terminal. The ID Number is preset to "1" at the factory. You can
change this number to any number between "1" and "99".
If it is necessary to change the JLIP ID number perform the
following steps.
1
2
3
456
7
8
0
9
3
¶
4¢
78
1¡
CH
MENU
SHUTTLE PLUS
OK
J terminal
NUMBER
ACCESS MAIN MENU SCREEN
1
Press MENU as many times as necessary.
ACCESS CUSTOM SET SCREEN
2
Press CH
5
∞
or SHUTTLE PLUS
%
fi
to move the
highlight bar (arrow) to "CUSTOM SET", then press OK.
ACCESS JLIP ID NO. SET SCREEN
3
Press CH5
∞
or SHUTTLE
PLUS%
fi
to move the
highlight bar (arrow) to
"JLIP ID NO. SET", then
press OK.
SET JLIP ID NUMBER
4
Press NUMBER keys to
enter the desired ID
number, then press OK.
RETURN TO NORMAL SCREEN
5
Press MENU as many times as necessary.
CUSTOM SET
OVERRIDE
AUTO CLOCK SET
LANGUAGE SELECT
VCR PLUS+ SET-UP
DBS RECEIVER OUTPUT
DBS RECEIVER BRAND SET
=JLIP ID NO. SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
JLIP ID NO. SET
1
PRESS NUMBER KEY (O-9)
THEN (OK)
PRESS (MENU) TO END