Filter
Top Products
22 EN
12
45
3
6
8
0
7
9
8
INITIAL SETTINGS (cont.)
INPUT RECEIVING CHANNEL
NUMBER
7
Press CH5
∞
, TIME
SCAN 5
∞
or the
appropriate NUMBER keys
to input the number of the
channel on which the
Guide Channel’s broad-
casts are received. Then
press OK.
● If there is more than one
mismatch, repeat steps 6
and 7 for each instance.
● If you are using a DBS receiver of RCA or SONY or
ECHOSTAR, it is not possible to input channel numbers
higher than 100. To input those channels, set "DBS
RECEIVER OUTPUT" to "OFF" (੬ pg.24), then try
again.
RETURN TO VCR PLUS+
SET-UP SCREEN
8
Press MENU.
CHECK INPUT DATA
9
Press CH5
∞
or TIME
SCAN 5
∞
to place the
arrow next to “GUIDE
CHANNEL MAP”, then
press OK.
● The Guide Channel and
VCR or cable box
channel numbers you
input appear on the
screen in ascending
order. Check to ensure
you’ve entered them
correctly.
● If you entered more than
10 sets of numbers, press
OK to see the next set of
numbers.
● Guide Channel Map contains only the Guide
Channels and VCR or CABLE channels that you
entered.
RETURN TO NORMAL
SCREEN
10
Press MENU as many times as necessary.
You can now use VCR Plus+ for quick and simple timer
programming (੬ pg. 46).
OK
NUMBER
MENU
CH
OK
CH
TIME SCAN
MENU
(Ex.) If WNJU(Ind.) is
received on channel 47
GUIDE CHANNEL SET
GUIDE CH :VCR CH
6 : 47
PRESS NUMBER KEY (0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
VCR PLUS+ SET-UP
GUIDE CHANNEL SET
=GUIDE CHANNEL MAP
CABLE BOX OUTPUT
CABLE BOX BRAND SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
GUIDE CHANNEL MAP
GUIDE:VCR GUIDE : VCR
6 :47 10:55
12 :41 15:38
33 :28 67:49
PRESS (OK) TO NEXT
PRESS (MENU) TO END