Filter
Top Products
52 EN
8
0
7
9
8
EDITING
Edit From A
Camcorder
You can use a camcorder as the player and your VCR as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s VIDEO
OUT and AUDIO OUT connectors and your VCR’s
VIDEO IN and AUDIO IN connectors.
● If connecting a camcorder with an S-VIDEO output
connector, it is recommended to use the S-VIDEO
connection to minimize picture degradation while
editing.
● When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
● If connecting to a camcorder with a monaural output,
connect the audio output connector on the
camcorder to AUDIO IN L of the VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Press NUMBER key “0” to set to AUX.
ACCESS MAIN MENU
SCREEN
4
Press MENU as many times as necessary.
If you’re using a JVC Master Edit Control-equipped
camcorder — step 5
If not — step 9
ACCESS FUNCTION SET 2
SCREEN
5
Press CH
5
∞ or TIME SCAN
5
∞ to place the arrow
next to “FUNCTION SET 2”, then press OK.
ACCESS SPECIAL
FUNCTION SCREEN
6
Press CH
5
∞ or TIME SCAN
5
∞ to place the arrow
next to “SPECIAL FUNCTION”, then press OK.
SELECT MODE
7
Press CH
5
∞ or TIME SCAN
5
∞ to place the arrow next
to “R.A. EDIT/PAUSE”.
MENU
OK
SPECIAL FUNCTION
=R.A. EDIT/PAUSE
AV COMPU-LINK
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
Your VCR
CH
NUMBER "0"
TIME SCAN
S-Video
cable
(supplied)
Player
Camcorder
EDIT
AUDIO OUT
VIDEO
OUT
S-VHS
OUT
Mini-plug cable (supplied)
(JVC camcorder only)
To rear panel PAUSE/
SPECIAL FUNCTION
connector
S-VHS
IN
VIDEO
IN
AUDIO
IN
Recorder
Audio/Video
cable (supplied)