Filter
Top Products
EN 37
RETURN TO FUNCTION SET 1 SCREEN
5
Press MENU.
ACCESS CA PLAYBACK SCREEN
6
Press CH5
∞
or TIME SCAN 5
∞
to place the arrow
next to "CA PLAYBACK", then press OK.
SELECT MODE
7
Place the arrow next to
"AUTO" by pressing CH5
∞
or TIME SCAN 5
∞
.
● Select "AUTO" to
automatically skip over
CA recorded commer-
cials during playback.
● Select "MANUAL" to
manually skip over CA recorded commercials by
pressing SKIP SEARCH.
● Select "OFF" to disable CA Playback of CA recorded
commercials.
● Press SKIP SEARCH during playback, with "MANUAL"
(or "AUTO") selected, to fast-motion the tape to the
end of the next commercial group or to the end of the
recording, and then resume normal playback.
NOTE:
If you press SKIP SEARCH during a commercial, the
VCR may not resume normal playback at the end of the
group of commercial. If this occurs press PLAY or STOP
to resume normal playback.
RETURN TO NORMAL SCREEN
8
Press MENU as many times as necessary.
U.S. Pat. No. 5,333,091
ACCESS MAIN MENU SCREEN
1
Press MENU as many times as necessary.
ACCESS FUNCTION SET 1 SCREEN
2
Press CH
5
∞ or TIME
SCAN
5
∞ to place the
arrow next to "FUNCTION
SET 1", then press OK.
ACCESS CA RECORD SCREEN
3
Press CH
5
∞ or TIME
SCAN
5
∞ to place the
arrow next to "CA
RECORD", then press OK.
SELECT MODE
4
Place the arrow next to
"ON" by pressing CH
5
∞
or TIME SCAN
5
∞.
● If you don't want to use
Commercial Advance,
set it to "OFF".
FUNCTION 1
AUDIO MONITOR
TIMESCAN AUDIO
AUX INPUT
TAPE DUB MODE
=CA RECORD
CA PLAYBACK
HI-FI REC LEVEL
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
"CA(Commercial Advance) RECORD" and "CA PLAYBACK" are
set to " OFF " at the factory. To set Commercial Advance
perform the following steps to set "CA RECORD" to "ON" and
"CA PLAYBACK" to "AUTO".
MAIN MENU
PROGRAM SET
TUNER SET
=FUNCTION SET 1
FUNCTION SET 2
FUNCTION SET 3
R.A. EDIT
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
MENU
OK
8
CH
TIME SCAN
MENU
OK
CH
SKIP SEARCH
COMMERCIAL ADVANCE
RECORD
=ON
OFF
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
COMMERCIAL ADVANCE
PLAYBACK
=AUTO
MANUAL
OFF
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
NOTES:
●
If you set "CA RECORD" to "ON" while recording is in
progress, the VCR will mark an index code at that location.
●
You cannot change the "CA PLAYBACK" setting during
Commercial Advance fast-motion playback.
●
While recording is in progress with "CA RECORD" set to
"ON", you cannot mark an index code manually, nor change
the recording tape speed.
●
During playback with "CA PLAYBACK" set to "OFF", pressing
SKIP SEARCH starts fast-motion playback for 30 seconds on
the counter (
੬
pg. 39).
●
Adding or erasing index marks codes (
੬
pg. 29) during a
group of commercials can cause incorrect CA Playback.
●
If there is a power outage while recording is in progress
with "CA RECORD" set to "ON" (
੬
pg. 37), commercials
that are recorded after the power is restored may not be
detected properly.
●
If you want to stop recording when "CA RECORD" is set to
"ON" (
੬
pg. 37), be sure to press STOP. If you press
POWER or TIMER to stop recording, that may affect
detection accuracy for commercials recorded afterwards.