Filter
Top Products
EN 53
RETURN TO FUNCTION
SET 1 SCREEN
12
Press MENU.
ACCESS TAPE DUB MODE
SCREEN
13
Press CH
5
∞ or TIME SCAN
5
∞ to place the arrow
next to “TAPE DUB MODE”, then press OK.
SELECT MODE
14
Place the arrow next to
"ON" by pressing CH
5
∞
or TIME SCAN
5
∞.
RETURN TO NORMAL
SCREEN
15
Press MENU as many times as necessary.
START PLAYER
16
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
17
Set your VCR to its record mode.
● If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction manual.)
NOTES:
●
It is not possible to set both "TAPE DUB MODE" and "DYNAMIC
CONTRAST" to ON.
●
Be sure to set "TAPE DUB MODE" back to "OFF" when you
finish editing.
●
If you use a cable box or a DBS receiver connected to one of
the VCR's auxiliary input connectors, be sure to select again
the required input at the AUX Input screen when you finish
editing.
8
MENU
CH
0
CH
MENU
OK
TIME SCAN
RETURN TO MAIN MENU
SCREEN
8
Press MENU as many times as necessary.
ACCESS FUNCTION SET 1
SCREEN
9
Press CH5
∞
or TIME SCAN 5
∞
to place the arrow
next to "FUNCTION SET 1", then press OK.
ACCESS AUX INPUT
SCREEN
10
Press CH5
∞
or TIME SCAN 5
∞
to place the arrow
next to “AUX INPUT”, then press OK.
SELECT INPUT
11
Press CH5
∞
or TIME
SCAN 5
∞
to place the
arrow next to your choice.
a– FRONT S-VHS: To use
the VCR's front S-VHS
and AUDIO IN
connectors.
b– FRONT VIDEO: To use
the VCR's front VIDEO
and AUDIO IN connectors.
c– REAR S-VHS: To use the VCR's rear S-VIDEO (S-
VHS) and AUDIO IN connectors.
d– REAR VIDEO: To use the VCR's rear VIDEO and
AUDIO IN connectors.
AUX INPUT
FRONT S-VHS
FRONT VIDEO
REAR S-VHS
=REAR VIDEO
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
OK
TAPE DUB MODE
=ON
OFF
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END