Filter
Top Products
EN 49
SET PROGRAM
INFORMATION
5
Press the appropriate NUMBER keys to set the date,
start/stop time and channel number. Press CH5
∞
or
TIME SCAN 5
∞
to set AM/PM and tape speed (SP or
EP). Press OK after AM/PM, channel number and tape
speed settings.
● Any information comprised of 1 digit (except the
channel number) should have a "0" entered before it.
● It is possible to set all information using the CH
5
∞ or
TIME SCAN
5
∞ button. (In this case, press OK after
each setting.) Do not use the CH ∞ or TIME SCAN ∞
button to set the date.
● The item that can be set blinks.
● If you are using the Illumi-Guide feature, OK blinks
when the following buttons are lit: NUMBER keys
(0 – 9), TIME SCAN, CANCEL and MENU.
NOTES:
● To timer-record a program received with a cable box
or DBS receiver, directly enter the channel that the
cable box or the DBS receiver receives it on.
● If you are using a DBS receiver of RCA or SONY or
ECHOSTAR, when one of the channels between 100
and 999 is entered, the VCR recognizes it as a
satellite channel and shows "DBS" on screen next to
the tape speed indication. To timer-record a cable
channel between 100 and 199, be sure to set "DBS
RECEIVER OUTPUT" to "OFF" (੬ pg.24).
● If you are using a PRIMESTAR DBS receiver, the VCR
recognizes any entered channel as a satellite channel
and shows "DBS" on screen next to the tape speed
indication. To timer-record a cable or regular
channel, be sure to set "DBS RECEIVER OUTPUT" to
"OFF" (
੬ pg.24).
**You can record selected programs at the same time
every weekday, or once a week. Before entering the
month, press NUMBER key “8” (DAILY) or “9”
(WEEKLY). Either "DAILY" or "WEEKLY" appears.
Press again and "DAILY" or "WEEKLY" disappears.
For weekly recording, the desired date for the day of
the week must be entered.
MAKE CORRECTIONS
6
To change any of the settings, press OK or TIME SCAN
™ £ until the item you want to change begins
blinking. Then set as in step 5.
● If you are using the Illumi-Guide feature, OK blinks
when the following buttons are lit: NUMBER keys
(0 – 9), TIME SCAN, CANCEL and MENU.
RETURN TO NORMAL
SCREEN
7
Press MENU as many times as necessary.
● Press just once to access the Auto Timer screen
(੬ pg. 51).
● If you are using the Illumi-Guide feature, all buttons
go out.
ENGAGE TIMER MODE
8
Press TIMER. The VCR turns off automatically.
12
45
3
6
8
0
7
9
OK
EXAMPLE
If you program the VCR to timer
record a show on December 24
on channel 100 from 12:00
noon to 1:00 PM in SP mode,
the screen will look like this:
● "DBS" will be displayed only
when you are using a DBS
receiver.
PROGRAM 1
DATE 12/24 WED
START 12:00 PM
STOP 1:00 PM
CHANNEL 100 SP DBS
PRESS NUMBER KEY(0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
NOTES:
●
To disengage the timer before recording starts, press TIMER
again. Pressing once more re-engages it.
●
In case of a power failure after programming, the VCR’s memory
backup keeps your selections for approximately 20 hours.
●
If you select "PROGRAM SET" without having set the date and
time, an error message appears. Follow its instructions.
●
If you enter a start time that has already passed, "ERROR"
appears on the screen and flashes.
●
Programs that start after midnight must have the next day’s date.
●
After timer recording is completed, the VCR’s power goes off
automatically.
●
You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.
●
If the end of tape is reached during timer recording, the
cassette is automatically ejected.
●
When timer-recording cable or satellite channels through an
external tuner, be sure to keep the cable box or satellite
receiver's power ON.
NUMBER "9"
TIMER
NUMBER "8"
NUMBER
CH
MENU
8
MENU
OK
CH
TIME SCAN