JVC HR-XV38SAG DVD Player User Manual


 
Masterpage:Right-No-Heading
EN 23
Filename [XV38ASAG_057S-VHS.fm]
Page 23 December 8, 2004 3:22 pm
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
The units power comes on automatically and the counter is
reset to 0:00:00.
Select the appropriate colour system with PAL/MESECAM
and NTSC (
pg. 54).
B
Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C
Choose a programme.
Press PR +/ or the number keys to select the channel
you wish to record.
D
Set the tape speed.
Press p. The current setting appears on the front
display panel or TV screen. Press p again to change
the setting while the tape speed is displayed on the TV
screen.
Each time you press p, the mode changes as follows.
SP{LP (or EP*)
* EP is for NTSC only.
E
Start recording.
Press and hold 7 and press 4 on the remote control, or
press 7 on the unit.
F
Pause/Resume recording.
Press 9. Press 4 to resume recording.
You can select channel during the Record Pause mode.
G
Stop recording.
Press 8. Then press x on the VHS deck to remove the
cassette.
Turn on the TV and select the video channel (or AV
mode).
Slide the TV/VCR/DVD switch on the remote
control to the right.
Slide to the
right.
B.E.S.T. works at the beginning of both the first SP and the
first LP recording after inserting the cassette. (
pg. 25)
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording, or timer recording (
pg. 24, 29), the recording
will resume automatically when power is restored to the unit
unless the units memory backup has expired.
Accidental erasure
prevention
To prevent accidental recording
on a recorded cassette, remove its
safety tab. To record on it later,
cover the hole with adhesive tape.
Record safety tab
XV38ASAG_EN_BOOK.book Page 23 Wednesday, December 8, 2004 4:00 PM