Filter
Top Products
Filename [XV38ASAG_09Trouble.fm]
Masterpage:Left+
68 EN
Page 68 December 8, 2004 2:43 pm
TROUBLESHOOTING (cont.)
● The disc does not contain audio/subtitles in multiple
languages.
]With some discs, the language should be set on the top menu.
(
੬ pg. 34)
● The disc does not contain subtitles.
● The subtitle display is set to off.
]Set the subtitles display to on. (
੬ pg. 37)
● A-B Repeat Playback is in progress. (
੬ pg. 44)
]The subtitles recorded around point A-B may not appear.
● The scene is not recorded from multiple angles.
MP3/JPEG Files Playback (DVD deck)
● No MP3 files or JPEG files are recorded to the disc.
]Replace to the disc with MP3 files or JPEG files are recorded.
● Files do not have the correct file extension in their file names.
]Add correct file extension to their file names.
● Files are not recorded in a format compliant with ISO 9660
Level 1 or 2.
]Replace the disc. (Record files using a compliant application.)
● The types of files other than MP3 or JPEG are recorded to the
disc.
]The disc which contains the types of files other than MP3 or
JPEG may not be played because of its disc characteristics or
recording conditions.
● When playing back a disc which contains both MP3 files and
JPEG files, the selected files in the “FILE TYPE” setting are
played back .
]Set “FILE TYPE” to either “AUDIO” (for MP3 files) or “STILL
PICTURE” (for JPEG files) which you want to play back
beforehand. (
੬ pg. 57)
● No MP3 files or JPEG files are recorded to the disc, or the disc
is an unplayable disc (such as CD-ROM).
]Replace the disc.
Recording (VHS deck)
● There is no cassette loaded, or the cassette loaded has had its
record safety tab removed.
]Insert a cassette, or using adhesive tape, cover the hole where
the tab was removed.
● “L-1” or “F-1” has been selected as the input mode.
]Set to the desired channel.
● The source (another video recorder, camcorder) has not been
properly connected.
]Confirm that the source is properly connected.
● All necessary power switches have not been turned on.
]Confirm that all units’ power switches are turned on.
● The input mode is not correct.
]Set the input mode to “L-1” or “F-1.”
● The camcorder has not been properly connected.
]Confirm that the camcorder is properly connected.
● The input mode is not correct.
]Set the input mode to “L-1” or “F-1.”
● The end of the tape was reached during recording.
]The programme may not have been recorded in its entirety.
Next time make sure you have enough time on the tape to
record the entire programme.
● Recording is in progress.
]Press 9 to pause the recording, change channels, then press
4 to resume recording.
Changing audio/subtitle language is not possible.
The subtitles do not appear on the TV screen.
Angle cannot be changed.
A disc cannot be played.
When playing back a disc which contains both MP3 files
and JPEG files, either MP3 files or JPEG files are played.
The control display appears on the TV screen, but no
operation can be performed.
Recording cannot be started.
TV broadcasts cannot be recorded.
Tape-to-tape editing is not possible.
Camcorder recording is not possible.
“ ” and “ ” on the front display panel won’t stop blinking.
The channel cannot be changed.
XV38ASAG_EN_BOOK.book Page 68 Wednesday, December 8, 2004 4:00 PM