JVC HR-XV38SAG DVD Player User Manual


 
Filename [XV38ASAG_057S-VHS.fm]
Masterpage:Left+
26 EN
Page 26 December 27, 2004 10:53 am
OPERATIONS ON VHS DECK (cont.)
G-CODE
®
/SHOWVIEW
TM
System Setup
The G-CODE timer programming system eliminates the need to
input channel, date, start and stop time data when setting the
timer record function.Simply key in the G-
CODE number for the
TV programme you wish to record (found in most TV listings)
and the unit's timer is automatically programmed.
You have to set Guide Program numbers, which are assigned to
each station for purposes of ShowView timer programming, for
all the stations stored in your unit's memory to get proper results.
Before G-
CODE setup you must have performed Auto Set Up.
(
pg. 14)
IMPORTANT
After setting the Guide Program Numbers, channel positions
may be incorrect if you stored or skipped channels. In this case,
re-perform Guide Program Number settings.
Guide Program Number Set
A
Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
B
Access the Main Menu screen.
Press SET UP.
C
Access the Initial Set screen.
Press rt to move the highlight bar (pointer) to “INITIAL
SETUP,” then press ENTER or e.
D
Access the Guide Program Set screen.
Press rt to move the highlight bar (pointer) to “G-CODE/
SHOWVIEW SETUP,” then press ENTER or e.
E
Enter the Guide Program number.
F
Enter the Receiving channel position number.
G
Return to the normal screen.
Press SET UP.
INFORMATION
G-CODE and SHOWVIEW are different trademarks used to
represent the same easy recording feature, but only the term
G-
CODE system will be used in the instructions. If you use the
SHOWVIEW system, follow the same instructions listed for
the G-
CODE system.
Turn on the TV and select the video channel (or AV
mode).
Slide the TV/VCR/DVD switch on the remote
control to the right.
Slide to the
right.
Press rt or number keys to
enter the Guide Program
number for the desired
station as shown in the TV
listings. Then press ENTER or
e.
Then press rt or number
keys to input the number of
the unit
s channel position on
which the Guide Program
number
s broadcast is
received by the unit. Then
press ENTER or e.
If the satellite broadcast is
received on your unit's
auxiliary channel “L-1,” select
“L-1” for the channel position.
Repeat steps E and F as necessary.
Guide Program Number
Guide Program (GUIDE PROG) number refers to the
assigned TV station numbers,according to broadcast
area, for G-
CODE timer recording. The Guide Program
numbers can be found in most TV listings.
G-CODE/SHOWVIEW SETUP
GUIDE PROG TV PROG
[0-9] OR [ / ]
2 5
G-CODE/SHOWVIEW SETUP
GUIDE PROG TV PROG
2 5
[0-9] OR [ / ]
XV38ASAG_057S-VHS.fm Page 26 Monday, December 27, 2004 10:53 AM