JVC HR-XV38SAG DVD Player User Manual


 
Filename [XV38ASAG_07Editing.fm]
Masterpage:Left+
46 EN
Page 46 December 8, 2004 3:59 pm
EDITING (VHS DECK) (cont.)
Edit To Or From Another
Video Recorder
You can use your unit as the source player or as the
recording deck.
A When using your unit as the source player:
B When using your unit as the recording deck:
A
Make connections.
A When using your unit as the source player:
connect its AUDIO/VIDEO OUTPUT connectors to
the recording deck.
B When using your unit as the recording deck:
connect its L-1INPUT connector to the source
player.
B
Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C
Set the input mode of recording deck.
With this unit, press AUX (number key 0) and/or PR to
select correct external input on the recording deck.
On this unit (when using this unit as the recording deck);
Select L-1”— when connecting the other recorder to the
AV input connectors on the rear panel.
Select F-1”— when connecting the other recorder to the
AV input connectors on the front panel.
When using another recorder as the recording deck, refer to its
instruction manual.
D
Set the edit mode.
See PICTURE CONTROL on page 54.
E
Engage the Record Pause mode of the
recording deck.
Locate the point where you start recording, then engage
the Record Pause mode.
F
Start the source player.
Engage the Play mode of the source player.
G
Start the recording deck.
Engage the Record mode of the recording deck.
NOTES:
All necessary cables can be obtained from your dealer.
When you select EDIT to dub tapes in step D, be sure to
select AUTO (or NORM when B.E.S.T. is set to OFF)
after you finish dubbing the tapes.
When you use this unit as the source player for editing, be sure
to set O.S.D. to OFF before starting. (
pg. 54)
Recorder
Your unit
Another recorder
Player
TV receiver
Audio/video
cable
Audio/video
cable
VCR channel
or AV mode
AUDIO/VIDEO
OUTPUT
Recorder Your unit
Player
Another recorder
TV receiver
Audio/video
cable
Recorder
Your unit
Another recorder
TV receiver
Audio/video
cable
VCR channel
or AV mode
Audio/video
cable
Player
VCR channel
or AV mode
Audio/video cable
F-1 VIDEO/AUDIO
INPUT (L-1)
Slide the TV/VCR/DVD switch on the remote control
to the right.
XV38ASAG_EN_BOOK.book Page 46 Wednesday, December 8, 2004 4:00 PM