Filter
Top Products
Masterpage:Right-No-Heading
19
Filename [XVS20EK_06Index.fm]
Page 19 March 28, 2003 6:55 pm
Results of Auto Set Up/Preset Download appear on the front display panel
If both Auto Channel Set and Auto Clock Set have been performed successfully, the
correct current time is displayed.
Turn on the TV and select its video channel or AV mode, then make sure that all necessary stations
have been stored in the unit’s memory by using the
PR
button(s).
●
If station names (ID –
੬
pg. 84) have also been stored in the unit’s memory, the station name will
be displayed at the top left corner of the TV screen for about 5 seconds when the unit is tuned to
a different station.
●
If you want to set the tuner manually such as to add or skip channels, to change channel
positions, or to set or change station names, see pages 80 – 84.
If Auto Channel Set has succeeded but Auto Clock Set has not, “1” (channel position) is
displayed.
A
Turn on the TV and select its video channel or AV mode, then make sure that all necessary
stations have been stored in the unit’s memory by using the
PR
button(s).
●
If station names (ID –
੬
pg. 84) have also been stored in the unit’s memory, the station name will
be displayed at the top left corner of the TV screen for about 5 seconds when the unit is tuned to
a different station.
●
If you want to set the tuner manually such as to add or skip channels, to change channel
positions, or to set or change station names, see pages 80 – 84.
B
Perform “Clock Set” on page 86.
If both Auto Channel Set and Auto Clock Set have failed, “– –:– –” is displayed.
Make sure the cables are connected properly and turn off the unit’s power once, then turn the unit’s
power back on again.
Perform “Auto Set Up” on page 16 or “Preset Download” on page 18 again.
IMPORTANT
●
To check if the Guide Program numbers have been set correctly, perform the VIDEO Plus+ Timer Programming. (
੬
pg. 32)
(S-VHS deck only)
●
In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work
properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the VIDEO Plus+
system, the unit will record a TV programme of a different station. When programming the timer using the VIDEO Plus+ system,
be sure to check the desired channel is selected correctly. (
੬
pg. 32, “VIDEO Plus+
®
Timer Programming”) (S-VHS deck only)
●
Your unit memorizes all detected stations even if reception of some of them is poor. You can delete those stations with an
unacceptable picture. (
੬
pg. 81, “Delete A Channel”)
INFORMATION
Language for the on-screen display (DVD deck)
Set manually the on-screen language for the DVD deck. (
੬
pg. 21)
Just Clock
Your unit is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular
intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to “ON”. (
੬
pg. 86, “Just
Clock”)
If you have any difficulty with the above procedures call the JVC Customer Service Hot Line
on 0870 330 5000
XVS20EK_01.book Page 19 Friday, March 28, 2003 7:00 PM