Filter
Top Products
Masterpage:Right-No-Heading
87
Filename [XVS20EK_10Subsidiary.fm]
Page 87 March 28, 2003 6:57 pm
E
Set the date and time.
Press
rt
to set the time, then press
OK
or
e
. The
“DATE” display begins blinking. Repeat the same
procedure to set the date and year.
●
When you set the time, press and hold
rt
to change the time
by 30 minutes.
●
When you set the date, press and hold
rt
to change the date
by 15 days.
F
Set Just Clock.
The default setting is “OFF”. Set as desired by pressing
rt
, then press
OK
or
e
.
●
For the Just clock function, refer to “Just Clock” on page 86.
●
If you set to “OFF”, you can disregard the next step as you
won’t be able to receive regular clock adjustments.
G
Set the source channel position for clock
data.
The unit is preset to receive clock setting and adjustment
data from channel position 1.
Press
rt
to set the channel position to the number
representing the station transmitting clock setting data,
then press
OK
or
e
.
H
Start the clock operation.
Press
SET UP MENU
.
NOTES:
●
Just Clock (when set to “ON”) adjusts the unit’s built-in clock
every hour, except for 23:00, 0:00, 1:00 and 2:00.
●
Just Clock is not effective when:
— the unit’s power is on.
— the unit is in the Timer mode. (S-VHS deck only)
— a difference of more than 3 minutes exists between the
built-in clock’s time and the actual time.
— the unit is in the Automatic Satellite Programme Recording
mode. (
੬
pg. 37) (S-VHS deck only)
— the unit is in the Power Save mode. (
੬
pg. 73) (S-VHS
deck only)
— “L-2 SELECT” is set to “SAT”. (
੬
pg. 63) (S-VHS deck only)
●
If Just Clock is set to “ON”, the unit’s clock is automatically
adjusted at the start/end of Summer Time.
●
Just Clock may not function properly depending on the
reception condition.
XVS20EK_01.book Page 87 Friday, March 28, 2003 7:00 PM