Masterpage:Right-No-Heading
33
Filename [XVS20EK_07S-VHS.fm]
Page 33 March 28, 2003 6:55 pm
E
Set the tape speed.
Press
SP/LP/EP
(
p
).
F
Set the PDC mode.
Press
PDC
(
number key “7”
) to select “ON” or “OFF”.
●
If “VPS/PDC ON” is displayed on the TV screen, “PDC” is set
to “ON”.
●
If “VPS/PDC OFF” is displayed on the TV screen, “PDC” is set
to “OFF”.
੬
“PDC Recording” on page 35.
●
VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this unit.
G
Return to the normal screen.
Press
PROG
or
OK
. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears.
●
Repeat steps
B
–
G
for each additional programme.
H
Engage the unit’s timer mode.
Press
#
(
TIMER
). The unit turns off automatically and
“
#
” appears on the front display panel.
●
To disengage the timer mode, press
#
(
TIMER
) again.
NOTES:
●
To Change The Stop Time:
— press
STOP +/–
after pressing
OK
in step
D
. You can
compensate for anticipated programme schedule delays.
●
To Timer-Record Weekly Or Daily Serials:
— after pressing
OK
in step
D
, press
WEEKLY
(
number key
“9”
) for weekly serials or
DAILY
(
number key “8”
) for daily
serials (Monday — Friday). Either “WEEKLY” or “DAILY”
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
●
You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a
ninth, “PROGRAM FULL” appears on the TV screen and
“FULL” appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes. (
੬
pg. 36)
●
If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier or
programme with the lower programme number will be
recorded.
Satellite Receiver Users
To timer-record a satellite broadcast using the VIDEO Plus+
system:
A
Set “L-2 SELECT” to “A/V”. (
੬
pg. 63)
B
Perform steps
A
–
H
.
C
Set the satellite receiver to the appropriate channel before
the selected programme begins.
D
Leave the satellite receiver’s power on.
XVS20EK_01.book Page 33 Friday, March 28, 2003 7:00 PM
