Filter
Top Products
Filename [XVS20EK_07S-VHS.fm]
Masterpage:Left+
34
Page 34 March 28, 2003 6:55 pm
OPERATIONS ON S-VHS DECK (cont.)
Express Timer
Programming
If you do not know the PlusCode number for the programme you
wish to record, use the following procedure to set your unit to
timer-record the programme.
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
A
Select the S-VHS deck.
On the unit
Press
S-VHS/DVD
repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press
S-VHS
so that the S-VHS indicator lights up.
B
Access the VIDEO Plus+ screen.
Press
PROG
.
C
Access the Programme screen.
The front display panel looks like this:
D
Enter the programme start time.
The front display panel looks like this:
E
Enter the programme stop time.
Press
STOP +/–
to enter the time you want recording to
stop.
●
Press and hold
STOP +/–
to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
F
Enter the programme date.
Press
DATE +/–
.
●
The current date appears on the TV screen. The date you enter
appears in its place.
Before performing Express Timer Programming:
●
Make sure that the unit’s built-in clock is set properly.
●
Insert a cassette with the safety tab in place. The unit will
come on automatically.
●
Turn on the TV and select the video channel (or AV mode).
●
Slide the
TV/S-VHS/DVD
switch to the right.
Press
START +/–
. (If you’re
just starting out, “P1”
appears.)
Press
START +/–
to enter the
time you want recording to
start.
●
Press and hold
START +/–
to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
XVS20EK_01.book Page 34 Friday, March 28, 2003 7:00 PM