Filter
Top Products
16
XV-D701BK [B, E] EN
LET0141-003A
Getting started
To install batteries in the remote control unit
The battery compartment is located on the back of the remote control unit.
1 Press down on the point shown by the arrow
at the top of the compartment cover, and pull
up the cover to open the compartment.
2 Place the two accessory R6P (SUM-3)/
AA(15F) batteries in the remote control
according to the polarity markings (“+” and
“–”) inside the compartment and on the
batteries.
3 Place the cover over the compartment, and
press down lightly.
• The batteries will last about six months with normal use. If the functions of the
remote control become erratic, replace the batteries. See “Precautions for the
safe use of batteries” below for more information.
Turn on the unit
To connect the power cord
When all the connections have been made, insert the power plug into the wall
outlet firmly. The STANDBY indicator lights and setup is completed.
Warning
• Disconnect the power cord if you are not going to use the unit for a long time.
• Disconnect the power cord before cleaning the unit.
• Disconnect the power cord before moving the unit.
• Do not connect or disconnect the power cord with wet hands.
• Do not pull the power cord when disconnecting it, as this may damage the cord
and cause fire, electric shock, or other accidents.
Caution
• Do not damage, remodel, twist, or pull the power cord, as this may cause fire,
electric shock, or other accidents.
• Contact a dealer and get a new power cord if the cord is damaged. A damaged
cord may cause fire, electric shock, or other accidents.
• Do not put anything heavy, or the unit, on the power cord, as this may cause
fire, electric shock, or other accidents.