Filter
Top Products
46
XV-D701BK [B, E] EN
LET0141-003A
Advanced operations
To simulate a surround sound [3D PHONIC]
7 During playback
1
Press
3D PHONIC
.
2
Within 10 seconds, select
the desired effect mode by
pressing
3D PHONIC
.
Each time you press
3D PHONIC
, the
effect mode changes as follows:
* When you play a DVD disc recorded in Dolby Digital which contains more
than 3 channels, ACTION does not appears.
3
Press to adjust the
effect level.
You can adjust the effect level in 5
level.
Toward L: Reduce the effect
Toward H: Enhance the effect
Selected effect mode
Effect level
NOTES
You can select a simulated surround effect depending on the disc contents. If you
connect the unit to your stereo system, you can enhance sound quality and
produce a greater surround effect.
Adjusting the surround sound
ACTION*
DRAMA
THEATER
OFF
THEATER
3D PHONIC
LH
THEATER
LH
3D PHONIC
¶ The sound effect (3D PHONIC) works correctly when playing back discs
recorded with Dolby Surround, Dolby Digital 5.1-CH or MPEG Multichannel
5.1-CH format.
It also works when playing back discs other than those above, but does not
provide the corecct effect.
¶ The sound effect is not possible, and will not work even if set when the unit
outputs a DTS or Dolby Digital or MPEG bitstream signal from the DIGITAL
OUT jack.
¶ The sound effect will not be set or operate, even if
3D PHONIC
is pressed, on the
sound of DVD discs recorded in Linear PCM.
¶ When you set the 3D PHONIC function to on, the DOWN MIX and
COMPRESSION setting in the PREFERENCE 2 display and settings in the
SPK.SETTING are disabled.
To turn off the 3D PHONIC
screen, press
ENTER
. The 3D
PHONIC screen disappears if
there are no operations for
more than 10 seconds.