Filter
Top Products
19
Getting started
Getting started
XV-D701BK [B, E] EN
LET0141-003A
English
Français
No. Manufacturer
01 AMSTRAD
02 AMSTRAD
03 AMSTRAD
04 RFT/ANKARO/QUADRAL/
SKYMASTER
05 RFT
06 KATHREIN
07 KATHREIN
08 KATHREIN/MASPRO
09 KATHREIN/PHILIPS
10 NOKIA
11 NOKIA/GRUNDIG
12 GRUNDIG/SIEMENS
13 PAGE
14 TECHNISAT
15 WISI
16 WISI/RADIX
17 FUBA/SEG
18 FTE
To use the remote control unit for satellite tuner operation
You can operate the satellite tuner with the remote control unit. To operate it, you
have to change the remote control signal. Also refer to the manual supplied with
it.
Changing the remote control signal
1 Set
SAT.
TV
DVD
on the remote control unit to SAT.
2 Press and hold
SATELLITE
/
, then press
SET
.
Do not release
SATELLITE
/
. Keep holding
SATELLITE
/
until the next step is completed.
3 Holding
SATELLITE
/
, enter the manufacturer’s code (two digits) using
0
to
9
.
See the lists on the right to find the manufacturer’s code.
4 Release
SATELLITE
/
.
The following buttons can be used for operating the satellite tuner (with
SAT.
TV
DVD
set to SAT.):
5 Try to operate the satellite tuner by pressing
SATELLITE
/
.
If the satellite tuner turns on or off, you have entered the correct code.
SATELLITE
/
CH
+
–
0
to
9
Turns the satellite tuner on or off.
Changes the channels.
Selects the channels.
NOTE
¶
If there is more than one code listed for your brand of the satellite tuner, try
each one until the correct one is entered.
Manufacturer’s code list