Filter
Top Products
55
Setting and adjustment
Setting and
adjustment
XV-D701BK [B, E] EN
LET0141-003A
English
Français
DOWN MIX
By setting DOWN MIX correctly, you can
get the optimum stereo mix for your
audio system from DVD discs recorded
with Dolby Digital surround multichannel
audio or MPEG Multichannel.
• Lt/Rt (Dolby Digital disc only):
You can monitor the unit’s audio
output signals via an amplifier with
built-in Dolby Pro Logic Decoder.
• L
0/R0:
You can monitor the unit’s audio output signals via a TV, an amplifier with no
built-in Dolby Pro Logic Decoder, or the unit’s headphone jack. Also for
recording DVD audio output to a cassette tape, MD, etc.
• OFF
When you monitor the unit’s 5.1-channel audio output signals via an amplifier
equipped with 5.1-channel inputs.
SPK.SETTING
PREFERENCE2PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lt/Rt
COMPRESSION
SCREEN SAVER
ON
MODE1
AUTO STANDBY
PRESS KEY
OFF
COMPRESSION
You can compress the dynamic range of
the sound if you need. Using this
function, you can listen to sound at low
volumes easily.
•ON
Audio is played back with the dynamic
range compressed.
• OFF
Audio is played back as it was recorded.
NOTES
¶
The compression function works only when playing back a disc recorded
with DOLBY DIGITAL 1 CH or 2CH. The setting is not effective for other
discs.
¶ The compression function is automatically set to ON when the downmix
function is set to Lt/Rt or L
0
/R
0
.
¶ The compression function does not work when the 3D PHONIC function is
activated.
¶ The downmix function does not work when the 3D PHONIC function is
activated.
SPK.SETTING
PREFERENCE2PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lt/Rt
COMPRESSION
SCREEN SAVER
ON
MODE1
AUTO STANDBY
PRESS KEY
OFF