Filter
Top Products
54
XV-D701BK [B, E] EN
LET0141-003A
Setting and adjustment
To set other preference items
PREFERENCE 2 can be set as follows:
DIGITAL AUDIO OUTPUT
To connect the unit‘s digital output to an
external amplifier or receiver equipped
with a digital input, this item must be set
correctly.
• PCM ONLY:
When you connect the DIGITAL OUT jack
of the unit and the linear PCM digital
input of a piece of audio equipment.
• STREAM/PCM:
When you connect to the digital input of an amplifier with built-in DTS Dolby
Digital, and MPEG Audio decoder.
• DOLBY DIGITAL/PCM:
When you connect to the digital input of a Dolby Digital decoder, or an amplifier
with built-in Dolby Digital decoder
The following chart shows the relationship between types of playback discs and
output signals.
Playback discs
DVD with 48-kHz,
16-bit linear PCM
DVD with 48-kHz,
20/24-bit linear PCM
DVD with 96-kHz,
linear PCM
DVD with DTS
DVD with Dolby
Digital
DVD with MPEG
audio
Video CD
Audio CD
Audio CD with DTS
STREAM/PCM
48-kHz, 16-bit linear
PCM
48-kHz, 20-bit linear
PCM
No output
DTS bitstream
Dolby Digital
bitstream
MPEG bitstream
44.1-kHz, 16-bit linear
PCM
44.1-kHz, 16-bit linear
PCM
DTS bitstream
PCM ONLY
←
←
←
←
48-kHz, 16-bit
linear PCM
←
←
←
←
Output
DOLBY DIGITAL/PCM
←
←
←
No output
←
48-kHz, 16-bit linear
PCM
←
←
←
SPK.SETTING
PREFERENCE2PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lt/Rt
COMPRESSION
SCREEN SAVER
ON
MODE1
AUTO STANDBY
PRESS KEY
OFF
NOTES
¶
The unit does not provide the DTS decoding function.
¶ When playing back an audio CD with DTS, only use a DTS decoder (or an amplifier
with a built-in DTS decoder). Playing back such a disc outputs an incorrect signal
from the analog output jacks, which may cause damage of speakers.
If you connect the analog outputs and digital outputs simultaneously, be
sure to select the source of the amplifier correctly, or set the level control of
the amplifier connected to the analog outputs to minimum.