Filter
Top Products
Masterpage:Right-NoTitle0
EN
17
Filename [SR-V10E1a-EN.fm]
Page 17 August 19, 2002 10:13 am
Variable Speed Search
During playback, turn the
JOG
dial to the right for
forward variable-speed search, or to the left for reverse
variable-speed search.
OR
During playback, press
w
or
e
.
● The more times you press, the faster the playback picture
moves.
● To decrease speed, press the button for the opposite direction.
NOTES:
●
For speed search, refer to the table below.
●
You can see smooth slow motion picture only during 1/2x
slow motion playback.
●
You can hear the normal audio track only during 1.5x speed
search.
* PAL SP/LP only
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
Activate Index Search.
Press
w
or
e
(
2
or
6
). “
2
1” or “
6
1” is
displayed on the TV screen and search begins in the
corresponding direction.
● To access index codes 2 through 9, press w
or
e
repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
w
twice.
To locate the beginning of D from the current position, press
e
once.
● When the specified index code is located, playback begins
automatically.
Skip Search
During playback, press
30 SEC
1 to 4 times to skip over
unwanted sections.
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
Activate Instant ReView.
Press
REVIEW
. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
● The front display panel tells you how many programmes have
been timer-recorded. If you have, for example, 3 programmes,
the Instant REVIEW indicator ( ) and “3” blink. To watch
the first of the 3 programmes, press
REVIEW
three times
. The
recorder searches and begins playback automatically. You can
access a programme as far as 9 index codes away from the
current tape position.
● The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Programme
Recording (
੬
pg. 35).
Mode Lock
— To prohibit any operations during
playback
Press and hold
OK
on the remote control for more than
5 seconds. “ ” and “ ” light up on the front display
panel. No buttons will function and playback will not be
interrupted until the recording end (unrecorded portion)
or tape end is reached (
੬
pg. 48).
To cancel Mode Lock, press and hold
OK
again for more
than 5 seconds.
● When
OK
is pressed to set Mode Lock, the on-screen display
appears and the time counter remains on the TV screen. If the
time counter is not necessary, set “O.S.D. (PLAY)” and “O.S.D.
(REC)” to “OFF” (
੬
pg. 45, 46).
NOTE:
It is also possible to use Mode lock during Repeat Playback
(
੬
pg. 18) and Series Playback (
੬
pg. 24).
To resume normal playback, press
4
.
Reverse
search
Reverse
play
Reverse
slow
motion
Slow
motion
Normal
play
Forward
search
Reverse
Forward
–7, –5, –3
–1
–1/6, –1/18
1/18, 1/6, 1/2*
1
1.5*,2, 3, 5, 7
Current position
Index number
To resume normal playback during a Skip Search,
press
4
.
SR-V10E1-EN.book Page 17 Monday, August 19, 2002 10:20 AM