Filter
Top Products
Masterpage:Right-NoTitle0
EN 41
Filename [SR-V10E3-EN.fm]
Page 41 August 20, 2002 4:13 pm
Edit To Or From
Another Video
Recorder
You can use your recorder as the source player or as the
recording deck.
A
Make connections.
A When using your recorder as the source player ...
... connect its AUDIO/VIDEO OUT or AUDIO/S VIDEO
OUT connectors to the audio/video or audio/S-video
input connectors on another recorder.
B When using your recorder as the recording deck ...
... connect its AUDIO/VIDEO IN or AUDIO/S VIDEO IN
connectors to the audio/video or audio/S-video output
connectors on another recorder.
B
Set the input mode of recording deck.
With this video recorder, press AUX (number key “0”)
and/or PR to select “L-1” for the AUDIO/VIDEO IN
connectors, or “S-1” for the AUDIO/S VIDEO IN
connectors, depending on the connector being used.
● When using another recorder as the recording deck, refer to its
instruction manual.
C
Set the edit mode.
See “PICTURE CONTROL” on page 45.
D
Start the source player.
Engage the Play mode of the source player.
E
Start the recording deck.
Engage the Record mode of the recording deck.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step 3, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
● When you use this recorder as the source player for editing, be
sure to set “O.S.D. (PLAY)” to “OFF” before starting
(
੬ pg. 46).
● When you use this recorder as the recording deck for editing,
set “O.S.D. (PLAY)“ and “O.S.D. (REC)“ to “OFF“ (
੬ pg. 45,
46) if you do not want to record the operational indicators
displayed on the TV screen.
● It is also possible to use the front AUDIO/VIDEO or AUDIO/
S-VIDEO input connectors for the connection. When you use
the front connectors, select “F-1” for the AUDIO/VIDEO input
connectors, “S-2” for the AUDIO/S-VIDEO input connectors
in step 2.
Advantages of S-VHS video recorders
You can edit from VHS to S-VHS, S-VHS to VHS, or, from
S-VHS to S-VHS.
● From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
● From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
● From S-VHS to S-VHS: All signals will be transferred with
minimum degradation.
A
B
Video
channel or
AV mode
Audio/video
cable
Recorder
Your recorder
Another recorder
PlayerTV receiver
Audio/video cable
Video
channel or
AV mode
Your recorder
Another recorder
Player
TV receiver
S-video cable
Recorder
Audio/video
cable
Audio/video cable
S-video cable
SR-V10E3-EN.fm Page 41 Friday, August 23, 2002 10:14 AM