Filter
Top Products
32
4.4.2 Alarm list Search
Take the following steps to proceed with the alarm-list search function.
(1) Press the Search button
to enter the search mode.
(2) Select the ALARM LIST and press the Enter button
to access the complete list of
alarm-event recorded video.
(3) Highlight the specific recorded video of your requirement and press the Enter button
to
display the selected video.
(Key Operation: Press the
“^” and “v” buttons, to select a video; press the “<”
and
“>” buttons, to flip over a page.)
4.4.3 TIME Search
Take the following steps to proceed with the time search function.
(1) Press the Search button
to enter the search mode.
(2) Select the TIME SEARCH and press the Enter button
to access the time-setting page.
(3) Set the time period you wish to search for the recorded video.
(4) Press the Enter button
to start searching and displaying the concerned image.
(5) If no video is found, please return to the time-setting page and repeat steps (3) and (4) again
for another search.
* About the location of the buttons, please refer to Page 10 2.1 Front View.
SEARCH
FULL LIST
ALARM LIST
TIME SEARCH
THUMBNAIL
SD CARDʳ
HD 1
A 1 11-18-02 13:22:16 16. 3M
A 2 02-14-03 16:55:45 15. 6M
A 3 02-17-03 13:22:38 17. 8M
SEARCH
FULL LIST
ALARM LIST
TIME SEARCH
THUMBNAIL
SD CARDʳ
TIME SEARCH
MM DD YEAR HH MM
11 / 17 / 2002 00 : 00
33
4.4.4 THUMBNAIL Search
Take the following steps to proceed with the thumbnail search function.
(1) Press the Search button
to enter the search mode.
(2) Select the THUMBNAIL and press the Enter button
to access the thumbnail page.
(3) Set the date you wish to search for the recorded video.
(4) Press the Enter button
to start searching and displaying the concerned image.
ϥ You can set up by using the “<” button
, the “>” button , the “^” button and the
“v” button
to move eye focus.
ϥ You can also set up by using the Shuttle Ring and the Jog Dial to move eye focus.
is the equal of the “<” button , is the equal of the “>” button , is the equal of
the “
^” button and is the equal of the “v” button .
(5) There are 5 levels of recording range modes to choose from: 1 Hour, 10 Minutes, 1 Minute,
10 Seconds and 1 Second. Select the specific field of your requirement and press the Enter
button
to enter the next level. If you want to return the previous level, please press the
Setup button
(6) Once reaching the critical point at any level, the user can start playback by just clicking the
PLAY button
.
* About the location of the buttons, please refer to Page 10 2.1 Front View.
SEARCH
FULL LIST
ALARM LIST
TIME SEARCH
THUMBNAIL
SD CARDʳ
THUMBNAIL
MM DD YEAR
03 / 13 / 2003